Navisworks General Discussion

Navisworks General Discussion

Reply
Active Member
koye
Posts: 7
Registered: ‎07-15-2012
Message 1 of 4 (689 Views)
Accepted Solution

How to maintain color from revit to navisworks?

689 Views, 3 Replies
08-23-2012 01:07 AM

Hi Autodesk Techanical Support

 

How to maintain color from revit to navisworks?All material and color disappeared in Naviswork.?

 

Thanks and Regards,

You are correct, color does not come over from Revit (does for AutoCAD, not Revit).  What you will see in NW from Revit is, at best, is the material define to the objects via the Object Styles.  However, there is a note when exporting to NWC from Revit to "try and find materials", often materials will get lost as well.  I recommend building SearchSets inside of NW and then use the Appearance Profiler or Presenter to assign a color/material.

If you're working with textures and the like, you can export an FBX file from Revit and you'll see some of the textures and colors. It's not as robust as an NWC export, but it does get the look mostly right. I've used this on architectural elements so users can see brick vs concrete and the like.

Valued Mentor
dennis
Posts: 730
Registered: ‎07-29-2005
Message 2 of 4 (670 Views)

Re: How to maintain color from revit to navisworks?

08-24-2012 06:44 AM in reply to: koye

You are correct, color does not come over from Revit (does for AutoCAD, not Revit).  What you will see in NW from Revit is, at best, is the material define to the objects via the Object Styles.  However, there is a note when exporting to NWC from Revit to "try and find materials", often materials will get lost as well.  I recommend building SearchSets inside of NW and then use the Appearance Profiler or Presenter to assign a color/material.

Valued Contributor
bbrown
Posts: 85
Registered: ‎08-01-2011
Message 3 of 4 (658 Views)

Re: How to maintain color from revit to navisworks?

08-26-2012 08:46 PM in reply to: koye

If you're working with textures and the like, you can export an FBX file from Revit and you'll see some of the textures and colors. It's not as robust as an NWC export, but it does get the look mostly right. I've used this on architectural elements so users can see brick vs concrete and the like.

Active Member
koye
Posts: 7
Registered: ‎07-15-2012
Message 4 of 4 (603 Views)

Re: How to maintain color from revit to navisworks?

09-30-2012 06:18 PM in reply to: bbrown

Thanks

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.

Announcements
Have API Questions?
New Dedicated Forum for Navisworks API