Inventor Publisher

Reply
Valued Contributor
miQlo
Posts: 90
Registered: ‎05-24-2011
Message 1 of 4 (552 Views)

High PPI Issues

552 Views, 3 Replies
10-04-2012 09:05 AM

When trying to publish images with higher PPI I run into problems. Internal and silhouette edges goes missing or edges that are not supposed to show are visible.

A PPI of 72 looks as it should so I wondered why only that setting worked. I tried to raise the PPI of 72 by multiplying it with 2 and 4 and it worked. But why doesn't it work with a PPI setting of 150 or 300?

 

Please see the attachment for examples.

Valued Contributor
miQlo
Posts: 90
Registered: ‎05-24-2011
Message 2 of 4 (421 Views)

Re: High PPI Issues

12-06-2012 05:09 AM in reply to: miQlo

Autodesk, please confirm that you have noticed this post and understand the issue.

Employee
LeoWan
Posts: 41
Registered: ‎07-11-2011
Message 3 of 4 (402 Views)

Re: High PPI Issues

12-09-2012 11:09 PM in reply to: miQlo

Hi,

 

Thank you for using Publisher and your feedback. We have files this issue in our internal track system.

It would help if you can provide more information about the setting you used for publisher image:

Are you use Inch as Width/Height unit? or use Pixel?

which iamge format are you using? PNG? JPG?...

 

Thanks,

Publisher QA

 

Valued Contributor
miQlo
Posts: 90
Registered: ‎05-24-2011
Message 4 of 4 (395 Views)

Re: High PPI Issues

12-10-2012 01:56 AM in reply to: LeoWan

I'm using Print Size in the Publish Area Setup. Pixel Size is impossible to work with since it expands the publish area outside of the screen if I use higher resolutions, that's one other thing you should fix.

The example images in the original post are PNGs but it does not matter which image format I use, I get the same result with JPGs and TIFs.

 

PAS.jpg

 

PTI.jpg

 

One other thing is that the image resolution in the Publish To Image window does not uptade, that could be very confusing. The pixel resolution should be 1799x3599 in the window above.

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.