Inventor Publisher

Inventor Publisher

Reply
Active Contributor
martin.vanecek
Posts: 26
Registered: ‎02-01-2010
Message 1 of 2 (569 Views)

Dimension allign?? Plane II Plane, Plane I-- point

569 Views, 1 Replies
11-14-2012 03:51 AM
Hi

Our customer have problem with dimesion,

How to create an aligned dimension (See attachment)??

I search on Diskusion groups same problems without solutions:

http://forums.autodesk.com/t5/Autodesk-Inventor-Publisher/Help-me-on-Dimensioning/m-p/3468538/highli...

http://forums.autodesk.com/t5/Autodesk-Inventor-Publisher/Problems-with-Dimensions/m-p/3461022/highl...

already second customer had asked me how make this allign (Plane II Plane, Point I--- plane)

Thanks for tips

 

 

Employee
peggy.wang
Posts: 89
Registered: ‎03-23-2008
Message 2 of 2 (507 Views)

Re: Dimension allign?? Plane II Plane, Plane I-- point

11-22-2012 07:30 PM in reply to: martin.vanecek

Please see my attached image.

When select the center of the arc or circle, please press TAB button on Keyboard. Publisher is a 3D software, and it support 3D dimension, it dimension the point to Point distance, if you want to Point to Line distance, please place the dimension and click the little button near the dimension, it will change to align.

Hope this helps. In image 2, the dimension is 17.68, this dimension is point to point. in image 3, the dimension is 17.52, it is point to line.



Peggy Wang
Sr. Software QA Engineer
Publisher Quality Assurance Team
Autodesk, Inc.
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.