Content Center

[robin.werneskog]

Hi,

I've got a few wishes:

- When creating members trough an assembly "Place from Content Center" it is not possible to create a member longer than 10000 mm (eg. DIN 1025 - IPB). The standard lengths when buying from suppliers in sweden is always 10+ m (12m, 14 m etc.). When creating members trough Frame generator there seems to be no limit in the members length.

- Missing UPE member in contentcenter (DIN 1026-2) parallel flange steel channel. This standard was released in 2002.. That is 11 years ago.

- Missing TORX screws in Content Center!?!? What?

[robin.werneskog]

Hi,

I've got a few wishes:

- When creating members trough an assembly "Place from Content Center" it is not possible to create a member longer than 10000 mm (eg. DIN 1025 - IPB). The standard lengths when buying from suppliers in sweden is always 10+ m (12m, 14 m etc.). When creating members trough Frame generator there seems to be no limit in the members length.

- Missing UPE member in contentcenter (DIN 1026-2) parallel flange steel channel. This standard was released in 2002.. That is 11 years ago.

- Missing TORX screws in Content Center!?!? What?

[dan_szymanski]

Your first Idea has been implemented within Autodesk Inventor 2016 as the 10,000 mm length limitation has been removed when placing standard content.  Special thanks to the author of this Idea and likewise to everyone who cast your Kudo for it.  Many CC libraries have been updated in Autodesk Inventor 2016, see the following link for the full list.  http://knowledge.autodesk.com/support/inventor-products/downloads/caas/downloads/content/inventor-20...

Lastly your third request has been captured here:

http://forums.autodesk.com/t5/inventor-ideastation/torx-screws-in-content-center/idi-p/5217037

Please be sure to cast your kudo it.  Thanks!