Inventor General Discussion

Inventor General Discussion

Reply
New Member
ksmayhue
Posts: 1
Registered: ‎11-30-2007
Message 1 of 3 (112 Views)

Wraping projected curve to a surface

112 Views, 2 Replies
05-01-2012 12:45 PM

Having trouble Wraping projected curve to a surface of a cylindrical solid to make a barrel cam,

Employee
johnsonshiue
Posts: 2,191
Registered: ‎04-30-2008
Message 2 of 3 (108 Views)

Re: Wraping projected curve to a surface

05-01-2012 01:33 PM in reply to: ksmayhue

Hi! The Wrap to Surface option in Project Curve to Surface (3D Sketch) limits the curve input to 2D Sketch. Is this behavior consistent with what you are seeing? Or, you are talking about a different function?

Thanks!

 



Johnson Shiue (johnson.shiue@autodesk.com)
Principal SQA Engineer, Inventor
Mechanical Design
Autodesk, Inc.

*Expert Elite*
JDMather
Posts: 27,059
Registered: ‎04-20-2006
Message 3 of 3 (105 Views)

Re: Wraping projected curve to a surface

05-01-2012 01:54 PM in reply to: ksmayhue

ksmayhue wrote:

Having trouble Wraping projected curve to a surface of a cylindrical solid to make a barrel cam,


Attach your file here.

There is a Cylindrical Cam generator in the Design Accelerators.  Much easier if your application can use this functionality.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.