Inventor General Discussion

Inventor General Discussion

Reply
Member
mmk6qa
Posts: 3
Registered: ‎10-26-2012
Message 1 of 5 (179 Views)

Working with 2 sketches.

179 Views, 4 Replies
10-26-2012 03:22 PM

Let's say I create a line in a sketch on xy plane. Exit sketch mode.

 

Now create another sketch, now I want to draw a circle on that line in the previous sketch.

Why I cannot exactly select a point on that line. I know I just can eyeball it. 

 

Please help.

Valued Contributor
bms953
Posts: 99
Registered: ‎05-21-2007
Message 2 of 5 (175 Views)

Re: Working with 2 sketches.

10-26-2012 04:08 PM in reply to: mmk6qa
u shuld project that line in Sketch 2 , and then u can create ur Circle
Behzad Meskini
freedom for Iran
Member
mmk6qa
Posts: 3
Registered: ‎10-26-2012
Message 3 of 5 (172 Views)

Re: Working with 2 sketches.

10-26-2012 04:13 PM in reply to: bms953

Please suggest good place to learn how to do that.

*Expert Elite*
JDMather
Posts: 27,473
Registered: ‎04-20-2006
Message 4 of 5 (166 Views)

Re: Working with 2 sketches.

10-26-2012 05:22 PM in reply to: mmk6qa

Help>Learning Tools>Skillbuilders and Tutorials

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Member
mmk6qa
Posts: 3
Registered: ‎10-26-2012
Message 5 of 5 (137 Views)

Re: Working with 2 sketches.

10-27-2012 05:40 PM in reply to: mmk6qa

Thank you very much.

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.