Community
Inventor Forum
Welcome to Autodesk’s Inventor Forums. Share your knowledge, ask questions, and explore popular Inventor topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

video card positive

12 REPLIES 12
Reply
Message 1 of 13
Anonymous
761 Views, 12 Replies

video card positive

just wanted to say that my quadro 750 xgl is working great on r6... using
driver 30.82... i'm verrrry happy, because i was dissapointed in its
performance when i purchased it for 5.3. Couldn't tell a noticeable diff.
before from my old GVX1.

--
Brian Land
Mechanical Design
Lorik Tool Inc.
12 REPLIES 12
Message 2 of 13
Anonymous
in reply to: Anonymous

I'm assuming that driver would also work with the 700XGL? Maybe I'll need
to check that out..

--
Sean Dotson, PE
http://www.sdotson.com
remove all #s from email
-----------------------------------------
"Brian Land" wrote in message
news:E16B8E1EBB48D29E47AC9410931715F2@in.WebX.maYIadrTaRb...
> just wanted to say that my quadro 750 xgl is working great on r6... using
> driver 30.82... i'm verrrry happy, because i was dissapointed in its
> performance when i purchased it for 5.3. Couldn't tell a noticeable diff.
> before from my old GVX1.
>
> --
> Brian Land
> Mechanical Design
> Lorik Tool Inc.
>
>
Message 3 of 13
Anonymous
in reply to: Anonymous

Anyone using a 900XGL?

"Sean Dotson" wrote in message
news:CF7D967AC0195AA46086A256E7DD6538@in.WebX.maYIadrTaRb...
> I'm assuming that driver would also work with the 700XGL? Maybe I'll need
> to check that out..
>
> --
> Sean Dotson, PE
> http://www.sdotson.com
> remove all #s from email
> -----------------------------------------
> "Brian Land" wrote in message
> news:E16B8E1EBB48D29E47AC9410931715F2@in.WebX.maYIadrTaRb...
> > just wanted to say that my quadro 750 xgl is working great on r6...
using
> > driver 30.82... i'm verrrry happy, because i was dissapointed in its
> > performance when i purchased it for 5.3. Couldn't tell a noticeable
diff.
> > before from my old GVX1.
> >
> > --
> > Brian Land
> > Mechanical Design
> > Lorik Tool Inc.
> >
> >
>
>
Message 4 of 13
Anonymous
in reply to: Anonymous

What OS?


-ARF

Brian Land wrote:

> just wanted to say that my quadro 750 xgl is working great on r6... using
> driver 30.82... i'm verrrry happy, because i was dissapointed in its
> performance when i purchased it for 5.3. Couldn't tell a noticeable diff.
> before from my old GVX1.
>
> --
> Brian Land
> Mechanical Design
> Lorik Tool Inc.
>
>
>
Message 5 of 13
Anonymous
in reply to: Anonymous

I upgraded to this driver but still see some slight lagging in the sketch
environment. I think I may just wait to see if SP1 clears it up.

--
Sean Dotson, PE
http://www.sdotson.com
remove all #s from email
-----------------------------------------
"Brian Land" wrote in message
news:E16B8E1EBB48D29E47AC9410931715F2@in.WebX.maYIadrTaRb...
> just wanted to say that my quadro 750 xgl is working great on r6... using
> driver 30.82... i'm verrrry happy, because i was dissapointed in its
> performance when i purchased it for 5.3. Couldn't tell a noticeable diff.
> before from my old GVX1.
>
> --
> Brian Land
> Mechanical Design
> Lorik Tool Inc.
>
>
Message 6 of 13
Anonymous
in reply to: Anonymous

win 2000, custom opengl settings set to (don't ask why...long story)
softimage, full optimization selected in inventor...... Sean said he saw
slight lagging in sketch mode, i do see a little of that also, but overall
performance is good.

"Aaron R. Friedman" wrote in message
news:3DC2A4FE.7000201@xprt.net...
> What OS?
>
>
> -ARF
>
> Brian Land wrote:
>
> > just wanted to say that my quadro 750 xgl is working great on r6...
using
> > driver 30.82... i'm verrrry happy, because i was dissapointed in its
> > performance when i purchased it for 5.3. Couldn't tell a noticeable
diff.
> > before from my old GVX1.
> >
> > --
> > Brian Land
> > Mechanical Design
> > Lorik Tool Inc.
> >
> >
> >
>
Message 7 of 13
Anonymous
in reply to: Anonymous

I ' sure there are a few that are having no hassles with graphics, but only
a few. This means there is something on the pcs of the masses, that
conflicts with Inv 6 graphics. Another app . direct 3d or something. Never
the less Autodesk need to find out what that is, and I bet its common to OS
as we all have one of those. We see when SP1 arrives

Colin




"Sean Dotson" wrote in message
news:E8CCB691F1F810E8ECBBDCA4055EE725@in.WebX.maYIadrTaRb...
> I upgraded to this driver but still see some slight lagging in the sketch
> environment. I think I may just wait to see if SP1 clears it up.
>
> --
> Sean Dotson, PE
> http://www.sdotson.com
> remove all #s from email
> -----------------------------------------
> "Brian Land" wrote in message
> news:E16B8E1EBB48D29E47AC9410931715F2@in.WebX.maYIadrTaRb...
> > just wanted to say that my quadro 750 xgl is working great on r6...
using
> > driver 30.82... i'm verrrry happy, because i was dissapointed in its
> > performance when i purchased it for 5.3. Couldn't tell a noticeable
diff.
> > before from my old GVX1.
> >
> > --
> > Brian Land
> > Mechanical Design
> > Lorik Tool Inc.
> >
> >
>
>
Message 8 of 13
loop29
in reply to: Anonymous

Hey guys,
this is all confusing with certified drivers and stuff. For best use of NV25GL (Quadro 4) core you should install drivers of version 40.71. I noticed a slightly performance increase from 30.82 to 40.71. If it is viewport performance that is bugging you, you can always try to overclock you´re Quadro by a LITTLE. Rivatuner can overclock on low hardware level, no reboot or whatever is required. That´s what I´ve done back in my Quadro 2 MXR days and it helped a lot in viewport performance.
In OpenGL properties make sure that you dissabled vsync. Overclocking can be made by doing 10 Hz increments by core and memory values. When you reached point of instability drope down the frequencies by 15 or 20 Hz.

regards
Message 9 of 13
Anonymous
in reply to: Anonymous

I am currently using version 40.72  as I was
told it is the only driver version nVidia will fix if problems are
found.

 


 


style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
Hey
guys,
this is all confusing with certified drivers and stuff. For best use
of NV25GL (Quadro 4) core you should install drivers of version 40.71. I
noticed a slightly performance increase from 30.82 to 40.71. If it is viewport
performance that is bugging you, you can always try to overclock you´re Quadro
by a LITTLE. Rivatuner can overclock on low hardware level, no reboot or
whatever is required. That´s what I´ve done back in my Quadro 2 MXR days and
it helped a lot in viewport performance.
In OpenGL properties make sure
that you dissabled vsync. Overclocking can be made by doing 10 Hz increments
by core and memory values. When you reached point of instability drope down
the frequencies by 15 or 20 Hz.

regards

Message 10 of 13
Anonymous
in reply to: Anonymous

Yes, without a glitch. I'm using the 30.82 driver og W2K + sp3 and EI 6 +
sp1
Dual Xeon 2.4 with 2 Gb mem. swapfile is static on physical disk no. 2.
I have never had any games /direct 3D applications on my machines. I wonder
it that could be the difference?

Regards

Finnur P.
"Eric Zirkle" <@> wrote in message
news:DCA38945B4AF2B9A22F30C305D532D0D@in.WebX.maYIadrTaRb...
> Anyone using a 900XGL?
>
> "Sean Dotson" wrote in message
> news:CF7D967AC0195AA46086A256E7DD6538@in.WebX.maYIadrTaRb...
> > I'm assuming that driver would also work with the 700XGL? Maybe I'll
need
> > to check that out..
> >
> > --
> > Sean Dotson, PE
> > http://www.sdotson.com
> > remove all #s from email
> > -----------------------------------------
> > "Brian Land" wrote in message
> > news:E16B8E1EBB48D29E47AC9410931715F2@in.WebX.maYIadrTaRb...
> > > just wanted to say that my quadro 750 xgl is working great on r6...
> using
> > > driver 30.82... i'm verrrry happy, because i was dissapointed in its
> > > performance when i purchased it for 5.3. Couldn't tell a noticeable
> diff.
> > > before from my old GVX1.
> > >
> > > --
> > > Brian Land
> > > Mechanical Design
> > > Lorik Tool Inc.
> > >
> > >
> >
> >
>
>
Message 11 of 13
Anonymous
in reply to: Anonymous

Running 29.42 on a PNY 750 xgl
and 12.41 on a ELSA Synergy III
both under WIN2kSP2
with no problems.

--

Michael Puschner

michael.puschner@scholle.de
www.scholle.de


"Brian Land" schrieb im Newsbeitrag
news:E16B8E1EBB48D29E47AC9410931715F2@in.WebX.maYIadrTaRb...
> just wanted to say that my quadro 750 xgl is working great on r6... using
> driver 30.82... i'm verrrry happy, because i was dissapointed in its
> performance when i purchased it for 5.3. Couldn't tell a noticeable diff.
> before from my old GVX1.
>
> --
> Brian Land
> Mechanical Design
> Lorik Tool Inc.
>
>
Message 12 of 13
Anonymous
in reply to: Anonymous

Running 2.4 Pentium Xenon
ATI Fire GL 8800
win 2k
with very minimal problems
X my fingers and knock on wood ATI
Jesse
Message 13 of 13
Anonymous
in reply to: Anonymous

You will find the 30.82 driver better, I have not used the 41.03 yet for
synIII.

--
Laurence,
--

"Michael Puschner" wrote in message
news:B7C4942A739521EA22E82CD9AB9B1924@in.WebX.maYIadrTaRb...
> Running 29.42 on a PNY 750 xgl
> and 12.41 on a ELSA Synergy III
> both under WIN2kSP2
> with no problems.
>
> --
>
> Michael Puschner
>
> michael.puschner@scholle.de
> www.scholle.de
>
>
> "Brian Land" schrieb im Newsbeitrag
> news:E16B8E1EBB48D29E47AC9410931715F2@in.WebX.maYIadrTaRb...
> > just wanted to say that my quadro 750 xgl is working great on r6...
using
> > driver 30.82... i'm verrrry happy, because i was dissapointed in its
> > performance when i purchased it for 5.3. Couldn't tell a noticeable
diff.
> > before from my old GVX1.
> >
> > --
> > Brian Land
> > Mechanical Design
> > Lorik Tool Inc.
> >
> >
>
>

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report