I need a special pattern that varies the original sketch dim. Is this possible?
Solved! Go to Solution.
Solved! by mrattray. See the answer in context.
I changed the direction of the pattern to follow the angled edge.
You can right click on one of your patterned sketch object and then choose Edit Pattern to modify your sketch pattern, Then click the >> button in the lower right hand corner of the dialog box. Then uncheck the Associative checkbox. This will make them individual objects that can be edited individually. But they'll likely need to be dimensioned in place afterward to keep them from moving around.
Depending on the task at hand, there might be a better way using a feature pattern instead of sketch pattern, but maybe not.
I hope this helps.
Best of luck to you in all of your Inventor pursuits,
Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below.
Could you add more info. about your issue or add one image to show the result you'd like to see?
Take a look at the attached part, I am talking about the Rectangular Pattern 1.
I am using still Inventor 2012.
Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.