Inventor General Discussion

Inventor General Discussion

Reply
Valued Contributor
cmharb
Posts: 62
Registered: ‎05-20-2008
Message 11 of 15 (152 Views)

Re: Urgen help with a part!! Please!!

02-12-2013 01:30 PM in reply to: NunoFelix

Even if you do get it in on time... Someone is going to have fun molding it.

w7u-64sp1,iv14,intel.xeon.e5-2620 0 @2.00 2.00-32gb,gtx560-4gb
Active Contributor
NunoFelix
Posts: 41
Registered: ‎10-05-2009
Message 12 of 15 (146 Views)

Re: Urgen help with a part!! Please!!

02-12-2013 01:33 PM in reply to: cmharb
What do you mean? Thank You, Nuno Felix Machine Shop Technician
Nuno Felix
Valued Contributor
cmharb
Posts: 62
Registered: ‎05-20-2008
Message 13 of 15 (142 Views)

Re: Urgen help with a part!! Please!!

02-12-2013 01:38 PM in reply to: NunoFelix

Coring out the large undercut.

w7u-64sp1,iv14,intel.xeon.e5-2620 0 @2.00 2.00-32gb,gtx560-4gb
*Expert Elite*
JDMather
Posts: 27,501
Registered: ‎04-20-2006
Message 14 of 15 (117 Views)

Re: Urgen help with a part!! Please!!

02-12-2013 03:45 PM in reply to: NunoFelix

NunoFelix wrote:

LOL, trust me, that is not the case... im not a student either.


What do you mean that is not the case.
I am telling you I would start over.

I would spend the next 6 hours doing it correclty.

Time and again I have done exactly that with parts posted here just like yours.

Not my parts - other peoples parts, yet they tell me they don't have the time.

As it is, unfortunately I don't have the time to remodel your part or I would.  Just for fun.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Valued Mentor
mpatchus
Posts: 492
Registered: ‎10-22-2008
Message 15 of 15 (74 Views)

Re: Urgen help with a part!! Please!!

02-13-2013 05:36 AM in reply to: JDMather

I have to agree with JD.  My students used to spend hours trying fix a part they created poorly, only to find they could have recreated the part correctly in far less time. 

Mike Patchus

Inventor 2012 SP3 ~ Vault Pro 2013
==================
Lenovo D20 Workstation Intel Xenon E5640@2.67GHz (2)
Win 7, 24gb RAM, NVIDIA Quadro FX 3800

Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below. :smileyhappy:
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.