Inventor General Discussion

Inventor General Discussion

Reply
Contributor
JL82
Posts: 24
Registered: ‎04-24-2010
Message 1 of 7 (825 Views)

Updating of drawing template

825 Views, 6 Replies
10-05-2010 05:14 AM

I have crated a drawing of the part. Now I must be updating the drawing template. How I can update the drawing templates to old drawings?

 

-Juha

Valued Mentor
ravikmb5
Posts: 313
Registered: ‎05-30-2009
Message 2 of 7 (820 Views)

Re: Updating of drawing template

10-05-2010 05:31 AM in reply to: JL82

open a new template

save copy as template

save styles to library

open old drawings

click update styles

replace any new templates(if u have different template name)

or use Drawings Resource Transfer Wizard

Which is in Tools

 

 

 

956iEB705A9400613802

Please mark this response as Problem Solved if it answers your question.
----------------------------------------------------------------------------------------------
Ravi Kumar MB,
i7 860 Dell Studio XPS Win 7 64 bit 12 Gb RAM
Autodesk Inventor Certified professional 2014
Email: ravikmb5@gmail.com
Contributor
JL82
Posts: 24
Registered: ‎04-24-2010
Message 3 of 7 (755 Views)

Re: Updating of drawing template

11-15-2010 11:35 PM in reply to: ravikmb5

Now I changed the Title block. How I can update its? I tried to save to the style library but there is not saving anything? So blocks is not in style library?

Active Member
dacecrown
Posts: 9
Registered: ‎08-29-2007
Message 4 of 7 (749 Views)

Re: Updating of drawing template

11-16-2010 12:42 AM in reply to: JL82

you can cut and paste the title block between drawings, when pasting it asked if you want to replace the existing (if the title block is the same name) or put a copy in. Then you can just save the new as a template file. 

 

Active Member
dacecrown
Posts: 9
Registered: ‎08-29-2007
Message 5 of 7 (748 Views)

Re: Updating of drawing template

11-16-2010 12:47 AM in reply to: dacecrown

forgot to say, right click and select copy from the drawing resources/title block/[title block name] in the drawing enviroment  as you cant select the title block directly from the drawing  :smileyhappy:

Distinguished Contributor
wseaston
Posts: 204
Registered: ‎03-04-2009
Message 6 of 7 (745 Views)

Re: Updating of drawing template

11-16-2010 01:22 AM in reply to: JL82

As in the post earlier in this thread, use the Drawing resource transfer tool. You can select to copy only the title block to the other target drawings.

 

Cheers

New Member
telegraphist
Posts: 1
Registered: ‎10-04-2012
Message 7 of 7 (470 Views)

Re: Updating of drawing template

10-04-2012 07:46 AM in reply to: JL82

Thank you so much ! You saved me from a boring and useless work ! :smileyhappy:

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.