Inventor General Discussion

Inventor General Discussion

Reply
*Expert Elite*
mrattray
Posts: 2,538
Registered: ‎09-13-2011
Message 1 of 8 (198 Views)
Accepted Solution

Undeletable work axes

198 Views, 7 Replies
03-25-2013 08:10 AM

I can't seem to get rid of these no longer needed work axes. Any idea why?

(Don't wory about the missing file references, you shouldn't need them.)

 

Capture.JPG

Mike (not Matt) Rattray

It looks like they were created as part of the pattern.  Just edit the pattern and un-select the axis from participating in the pattern.  Then the only one you will have is the original, which you can delete if you need to.

 

-cwhetten

Please click "Accept as Solution" if this response answers your question.

Distinguished Mentor
swhite
Posts: 531
Registered: ‎11-08-2012
Message 2 of 8 (189 Views)

Re: Undeletable work axes

03-25-2013 08:28 AM in reply to: mrattray

If it is the origin plane you can't delete it, but you can turn the visibility of them on or off by right-clicking on them and selecting visibility. if it is a user created plane then right-click it and select delete. The origin planes can not be deleted.

Steven White
Lee C. Moore, Inc.
www.lcm-wci.com
Inventor 2011
Intel Dual Xeon E31225 @ 3.1 GHz CPU
16 GB RAM
NVIDIA Quadro 600 GPU
Windows 7 - 64 Bit
Valued Mentor
japike
Posts: 322
Registered: ‎02-06-2004
Message 3 of 8 (179 Views)

Re: Undeletable work axes

03-25-2013 08:41 AM in reply to: mrattray

I don't know why they are there. The only way I could get rid of them was to pull the End of Folder marker above Pattern3, put in a new pattern and delete all features below EOP. 

Peace,
Jeff
Inventor 2013
Valued Mentor
japike
Posts: 322
Registered: ‎02-06-2004
Message 4 of 8 (174 Views)

Re: Undeletable work axes

03-25-2013 08:45 AM in reply to: japike

Looks like maybe you can just change the visibility of the work features too. Since they don't seem to exist in the browser you can't turn the visibility back on.

Peace,
Jeff
Inventor 2013
*Expert Elite*
cwhetten
Posts: 1,090
Registered: ‎09-03-2008
Message 5 of 8 (170 Views)

Re: Undeletable work axes

03-25-2013 08:50 AM in reply to: japike

It looks like they were created as part of the pattern.  Just edit the pattern and un-select the axis from participating in the pattern.  Then the only one you will have is the original, which you can delete if you need to.

 

-cwhetten

Please click "Accept as Solution" if this response answers your question.

*Expert Elite*
mrattray
Posts: 2,538
Registered: ‎09-13-2011
Message 6 of 8 (153 Views)

Re: Undeletable work axes

03-25-2013 09:32 AM in reply to: cwhetten

There isn't any original axis to deselect or delete.

Mike (not Matt) Rattray

*Expert Elite*
mrattray
Posts: 2,538
Registered: ‎09-13-2011
Message 7 of 8 (147 Views)

Re: Undeletable work axes

03-25-2013 09:34 AM in reply to: japike

japike wrote:

Looks like maybe you can just change the visibility of the work features too. Since they don't seem to exist in the browser you can't turn the visibility back on.


This seems to work fine. I was assuming that they would come back when the number of slots changed, but this doesn't seem to be the case. Thanks!

Mike (not Matt) Rattray

Employee
Yijiang.Cai
Posts: 359
Registered: ‎05-20-2008
Message 8 of 8 (111 Views)

Re: Undeletable work axes

03-26-2013 02:26 AM in reply to: mrattray

It is really interesting that how these work axis are created. However, you could use the attached iLogic rule to remove them.

 

Hope it helpful for you!

Thanks,
River Cai

Inventor Quality Assurance Team
Autodesk, Inc.
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.