Inventor General Discussion

Reply
*Triton, Mark
Message 1 of 3 (33 Views)

Ugly Outlines

33 Views, 2 Replies
11-18-2002 11:29 PM
So far, IV6 has not crashed on me (whew!). I still, however, have
print/plot display issues. In an earlier thread, we found that there is a
solution to the hidden line bleed thru problem. Now for another issue -
translucent parts. In this case, I want to see the "hidden" edges, and I
DON'T want to see ugly black outlines on the part. See CF files under the
same heading. Thanks.


--
Mark Triton
E/M Packaging Designer
World Precision Instruments, Inc.
Sarasota, FL
*Autodesk\
Message 2 of 3 (33 Views)

Re: Ugly Outlines

11-20-2002 02:29 AM in reply to: *Triton, Mark
I just checked this in R5.3, and it behaves the same way. We are
investigating the edge display issues, and I will bring this up as well.

Loren Jahraus
Autodesk Inventor Workflow Team

"Mark Triton" wrote in message
news:FACE80461723CA9F2B8F692ACFF5F5B7@in.WebX.maYIadrTaRb...
> So far, IV6 has not crashed on me (whew!). I still, however, have
> print/plot display issues. In an earlier thread, we found that there is a
> solution to the hidden line bleed thru problem. Now for another issue -
> translucent parts. In this case, I want to see the "hidden" edges, and I
> DON'T want to see ugly black outlines on the part. See CF files under the
> same heading. Thanks.
>
>
> --
> Mark Triton
> E/M Packaging Designer
> World Precision Instruments, Inc.
> Sarasota, FL
>
>
*Caldwell, Larry
Message 3 of 3 (33 Views)

Re:

11-20-2002 04:16 AM in reply to: *Triton, Mark
Good man! If I could make shaded views look like they do in the model I
could start using shaded views in drawings. Cool!
~Larry

"Loren Jahraus (Autodesk)" wrote in message
news:CD76D1E9EA10AB1A4188F8D6D92E05D8@in.WebX.maYIadrTaRb...
> I just checked this in R5.3, and it behaves the same way. We are
> investigating the edge display issues, and I will bring this up as well.
>
> Loren Jahraus
> Autodesk Inventor Workflow Team
>
> "Mark Triton" wrote in message
> news:FACE80461723CA9F2B8F692ACFF5F5B7@in.WebX.maYIadrTaRb...
> > So far, IV6 has not crashed on me (whew!). I still, however, have
> > print/plot display issues. In an earlier thread, we found that there is
a
> > solution to the hidden line bleed thru problem. Now for another issue -
> > translucent parts. In this case, I want to see the "hidden" edges, and
I
> > DON'T want to see ugly black outlines on the part. See CF files under
the
> > same heading. Thanks.
> >
> >
> > --
> > Mark Triton
> > E/M Packaging Designer
> > World Precision Instruments, Inc.
> > Sarasota, FL
> >
> >
>
>
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.