Inventor General Discussion

Inventor General Discussion

Reply
Contributor
bobuhl
Posts: 15
Registered: ‎11-20-2003
Message 1 of 6 (24 Views)

turkeycone needs to flatten

24 Views, 5 Replies
11-21-2002 03:30 AM
I have tried both starting with sheetmetal and flanges, and also this shell. I'm sure I'm missing something simple. See CF thanks
*Japper
Message 2 of 6 (24 Views)

Re: turkeycone needs to flatten

11-21-2002 04:47 AM in reply to: bobuhl
Not sure what the problem is I opened your file and
you already have a flat pattern  that works? Am I missing
somthing?

JP


style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
I
have tried both starting with sheetmetal and flanges, and also this shell. I'm
sure I'm missing something simple. See CF thanks
*Yeandle, Laurence
Message 3 of 6 (24 Views)

Re: turkeycone needs to flatten

11-21-2002 04:52 AM in reply to: bobuhl
IV's flat pattern of this is not correct, it shows
a flattened cone but has lost the flat tabs?


--

Laurence,
  
Power is nothing without
Control
---
        


style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
I
have tried both starting with sheetmetal and flanges, and also this shell. I'm
sure I'm missing something simple. See CF thanks
Contributor
bobuhl
Posts: 15
Registered: ‎11-20-2003
Message 4 of 6 (24 Views)

Re:

11-21-2002 04:58 AM in reply to: bobuhl
thanks for looking, I don't see any compound curves. I also tried fileting the corners B4 shelling, but that didn't help.
*Yeandle, Laurence
Message 5 of 6 (24 Views)

Re:

11-21-2002 05:09 AM in reply to: bobuhl
I think Autodesk need to look at this stuff, flat
pattern is a black art in IV and seems a long way to go.


--
Laurence,
  
Power is nothing without
Control
---
        


style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
thanks
for looking, I don't see any compound curves. I also tried fileting the
corners B4 shelling, but that didn't help.
*Autodesk\
Message 6 of 6 (24 Views)

Re: turkeycone needs to flatten

11-21-2002 06:14 AM in reply to: bobuhl
I built one lofting between polygons. Since all of the sides are flat, there
isn't any distortion during the loft. I posted it to customer files.

Loren Jahraus
Autodesk Inventor Workflow Team
"bobuhl" wrote in message
news:f1261c7.-1@WebX.maYIadrTaRb...
> I have tried both starting with sheetmetal and flanges, and also this
shell. I'm sure I'm missing something simple. See CF thanks
>
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.