Inventor General Discussion

Inventor General Discussion

Reply
New Member
kvt3pd
Posts: 2
Registered: ‎02-11-2013
Message 1 of 4 (585 Views)

Triangular Distributed Load in Inventor

585 Views, 3 Replies
02-11-2013 10:13 PM

I am trying to use the stress analysis function on Inventor. Is it possible to apply a triangular distributed load? I know I can use the pressure tool to put a uniform distributed load on my part, but this is not realistic for the application i am trying to model. If there is some tutorial please let me know.

 

 

*Expert Elite*
JDMather
Posts: 27,983
Registered: ‎04-20-2006
Message 2 of 4 (561 Views)

Re: Triangular Distributed Load in Inventor

02-12-2013 05:09 AM in reply to: kvt3pd

Attach the ipt file here.

Add any additional information that might be useful in answering the question (like specification of load value(s) and location(s)/distribution.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
New Member
kvt3pd
Posts: 2
Registered: ‎02-11-2013
Message 3 of 4 (540 Views)

Re: Triangular Distributed Load in Inventor

02-12-2013 10:49 AM in reply to: kvt3pd

So  I would like to have a triangular dristributed load along the top surface of my part to be 16,615 N. I am a student working on a project for my senior thesis. This is just my initial stage. I will like to make this into a rotor blade as my next stage. So if you can show me how you are doing this that will be great.

 

Thank you

*Expert Elite*
blair
Posts: 4,305
Registered: ‎11-13-2006
Message 4 of 4 (532 Views)

Re: Triangular Distributed Load in Inventor

02-12-2013 11:34 AM in reply to: kvt3pd

If you want the load/force to be distributed over/on a triangular shape, then use the Split-Face to to designate the area/shape you want the load/force applied.

Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below.

IV2015 SP1 PDSU / Sim Mech 2015 r1 /
Win7-64
EVGA X79 - Classified, iCore7 3930k 32Gb Quad-Channel
950Gb (2 x 500Gb Sata III SSD RAID0 Adaptec 6805E Controller)
Nvidia GTX-690 Classified - 344.60
SpacePilot Pro 3.17.7, 6.17., 4.11
Delta Tau Chi ΔΤΧ
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Are You Going To Be @ AU 2014? Feel free to drop by our AU topic post and share your plans, plug a class that you're teaching, or simply check out who else from the community might be in attendance. Ohh and don't forgot to stop by the Autodesk Help | Learn | Collaborate booths in the Exhibit Hall and meet our community team if you get a chance!