Community
Inventor Forum
Welcome to Autodesk’s Inventor Forums. Share your knowledge, ask questions, and explore popular Inventor topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Tooling Slide (Split Cavity) Help

1 REPLY 1
Reply
Message 1 of 2
wseaston
443 Views, 1 Reply

Tooling Slide (Split Cavity) Help

Hi,

 

I am struggling to figure out how to create a slide for the mold I am designing. I have looked at the tooling tutorials but they are not very helpfull when it comes to something which doesn't follow the tutorial workflow.

 

In the case of our product I require that the cavity which has been created to be split down the centre into two halves (essentially the cavity becomes the slides). I have tried a number of methods to achieve this but can't get it right.

 

Please could someone point me in a direction which may help.

 

Thanks

1 REPLY 1
Message 2 of 2
MingweiGao
in reply to: wseaston

hi,

From your attached pictures and description, I recommend you to use rectangular workpiece(not cylindrical workpiece). After you created the core and cavity, you can create two inserts of cavity, let each insert has half of it.

 

If you can send your part to me, I may give you more suggestion of it. My mail address is Mingwei.gao@autodesk.com

 

Thanks,

 



Steven Gao

Sr. SQA Engineer

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report