Inventor General Discussion

Reply
*mpower
Message 1 of 10 (65 Views)

Threads in detail don't show

65 Views, 9 Replies
12-11-2002 12:25 AM
I have a drawing where the threads are shown as hidden lines in the section
view, but the detail view of the section does not show them. Furthermore, I
can't get the Hole/Thread Notes tool to work to define the threads in the
section view. Can anyone tell me why and how to fix it?

Check out CF with the same subject.

Thanks,

-Mike
New Member
ddelaiarro
Posts: 1
Registered: ‎12-24-2002
Message 2 of 10 (65 Views)

Re: Threads in detail don't show

12-11-2002 02:43 AM in reply to: *mpower
great question. I'd love to see how to do this as I deal a lot with threaded parts.
*Dotson, Sean
Message 3 of 10 (65 Views)

Re: Threads in detail don't show

12-11-2002 03:28 AM in reply to: *mpower
See CF under your post. Mine seem to show up... ???

Also you cannot put a hole note on a section view. I don't think you ever
could...

--
Sean Dotson, PE
http://www.sdotson.com
Check the Inventor FAQ for most common questions
http://www.sdotson.com/faq.html
-----------------------------------------
"mpower" wrote in message
news:3FAD09BE32409526D28D6F5E5D78EF5D@in.WebX.maYIadrTaRb...
> I have a drawing where the threads are shown as hidden lines in the
section
> view, but the detail view of the section does not show them. Furthermore,
I
> can't get the Hole/Thread Notes tool to work to define the threads in the
> section view. Can anyone tell me why and how to fix it?
>
> Check out CF with the same subject.
>
> Thanks,
>
> -Mike
>
>
*KJohnson
Message 4 of 10 (65 Views)

Re:

12-11-2002 03:41 AM in reply to: *mpower
Trails don't show up in a detail view either.

Kathy Johnson

"Sean Dotson" wrote in message
news:5E1F24CB71407B135CDC8E8050512674@in.WebX.maYIadrTaRb...
> See CF under your post. Mine seem to show up... ???
>
> Also you cannot put a hole note on a section view. I don't think you ever
> could...
>
> --
> Sean Dotson, PE
> http://www.sdotson.com
> Check the Inventor FAQ for most common questions
> http://www.sdotson.com/faq.html
> -----------------------------------------
> "mpower" wrote in message
> news:3FAD09BE32409526D28D6F5E5D78EF5D@in.WebX.maYIadrTaRb...
> > I have a drawing where the threads are shown as hidden lines in the
> section
> > view, but the detail view of the section does not show them.
Furthermore,
> I
> > can't get the Hole/Thread Notes tool to work to define the threads in
the
> > section view. Can anyone tell me why and how to fix it?
> >
> > Check out CF with the same subject.
> >
> > Thanks,
> >
> > -Mike
> >
> >
>
>
*mpower
Message 5 of 10 (65 Views)

Re:

12-11-2002 03:47 AM in reply to: *mpower
Uhm.... why?

"KJohnson" wrote in message
news:FAFD923918003BF31926A58262EE433B@in.WebX.maYIadrTaRb...
> Trails don't show up in a detail view either.
>
> Kathy Johnson
>
> "Sean Dotson" wrote in message
> news:5E1F24CB71407B135CDC8E8050512674@in.WebX.maYIadrTaRb...
> > See CF under your post. Mine seem to show up... ???
> >
> > Also you cannot put a hole note on a section view. I don't think you
ever
> > could...
> >
> > --
> > Sean Dotson, PE
> > http://www.sdotson.com
> > Check the Inventor FAQ for most common questions
> > http://www.sdotson.com/faq.html
> > -----------------------------------------
> > "mpower" wrote in message
> > news:3FAD09BE32409526D28D6F5E5D78EF5D@in.WebX.maYIadrTaRb...
> > > I have a drawing where the threads are shown as hidden lines in the
> > section
> > > view, but the detail view of the section does not show them.
> Furthermore,
> > I
> > > can't get the Hole/Thread Notes tool to work to define the threads in
> the
> > > section view. Can anyone tell me why and how to fix it?
> > >
> > > Check out CF with the same subject.
> > >
> > > Thanks,
> > >
> > > -Mike
> > >
> > >
> >
> >
>
>
*mpower
Message 6 of 10 (65 Views)

Re:

12-11-2002 03:58 AM in reply to: *mpower
Sean,

I tried to duplicate your method, and it worked file, but if the detail
definition circle does not enclose the entire diameter, IV has some
problems. See CF under my post.

"Sean Dotson" wrote in message
news:5E1F24CB71407B135CDC8E8050512674@in.WebX.maYIadrTaRb...
> See CF under your post. Mine seem to show up... ???
>
> Also you cannot put a hole note on a section view. I don't think you ever
> could...
>
> --
> Sean Dotson, PE
> http://www.sdotson.com
> Check the Inventor FAQ for most common questions
> http://www.sdotson.com/faq.html
> -----------------------------------------
> "mpower" wrote in message
> news:3FAD09BE32409526D28D6F5E5D78EF5D@in.WebX.maYIadrTaRb...
> > I have a drawing where the threads are shown as hidden lines in the
> section
> > view, but the detail view of the section does not show them.
Furthermore,
> I
> > can't get the Hole/Thread Notes tool to work to define the threads in
the
> > section view. Can anyone tell me why and how to fix it?
> >
> > Check out CF with the same subject.
> >
> > Thanks,
> >
> > -Mike
> >
> >
>
>
*Dotson, Sean
Message 7 of 10 (65 Views)

Re:

12-11-2002 04:05 AM in reply to: *mpower
Sounds like a bug then...

--
Sean Dotson, PE
http://www.sdotson.com
Check the Inventor FAQ for most common questions
http://www.sdotson.com/faq.html
-----------------------------------------
"mpower" wrote in message
news:8A5E7771F37D564620D11D84D8A4D053@in.WebX.maYIadrTaRb...
> Sean,
>
> I tried to duplicate your method, and it worked file, but if the detail
> definition circle does not enclose the entire diameter, IV has some
> problems. See CF under my post.
>
> "Sean Dotson" wrote in message
> news:5E1F24CB71407B135CDC8E8050512674@in.WebX.maYIadrTaRb...
> > See CF under your post. Mine seem to show up... ???
> >
> > Also you cannot put a hole note on a section view. I don't think you
ever
> > could...
> >
> > --
> > Sean Dotson, PE
> > http://www.sdotson.com
> > Check the Inventor FAQ for most common questions
> > http://www.sdotson.com/faq.html
> > -----------------------------------------
> > "mpower" wrote in message
> > news:3FAD09BE32409526D28D6F5E5D78EF5D@in.WebX.maYIadrTaRb...
> > > I have a drawing where the threads are shown as hidden lines in the
> > section
> > > view, but the detail view of the section does not show them.
> Furthermore,
> > I
> > > can't get the Hole/Thread Notes tool to work to define the threads in
> the
> > > section view. Can anyone tell me why and how to fix it?
> > >
> > > Check out CF with the same subject.
> > >
> > > Thanks,
> > >
> > > -Mike
> > >
> > >
> >
> >
>
>
*KJohnson
Message 8 of 10 (65 Views)

Re:

12-11-2002 04:26 AM in reply to: *mpower
Because it does?

Kathy Johnson

"mpower" wrote in message
news:11C4AE3BEADAE9429039BD2F04B84393@in.WebX.maYIadrTaRb...
> Uhm.... why?
>
> "KJohnson" wrote in message
> news:FAFD923918003BF31926A58262EE433B@in.WebX.maYIadrTaRb...
> > Trails don't show up in a detail view either.
> >
> > Kathy Johnson
> >
> > "Sean Dotson" wrote in message
> > news:5E1F24CB71407B135CDC8E8050512674@in.WebX.maYIadrTaRb...
> > > See CF under your post. Mine seem to show up... ???
> > >
> > > Also you cannot put a hole note on a section view. I don't think you
> ever
> > > could...
> > >
> > > --
> > > Sean Dotson, PE
> > > http://www.sdotson.com
> > > Check the Inventor FAQ for most common questions
> > > http://www.sdotson.com/faq.html
> > > -----------------------------------------
> > > "mpower" wrote in message
> > > news:3FAD09BE32409526D28D6F5E5D78EF5D@in.WebX.maYIadrTaRb...
> > > > I have a drawing where the threads are shown as hidden lines in the
> > > section
> > > > view, but the detail view of the section does not show them.
> > Furthermore,
> > > I
> > > > can't get the Hole/Thread Notes tool to work to define the threads
in
> > the
> > > > section view. Can anyone tell me why and how to fix it?
> > > >
> > > > Check out CF with the same subject.
> > > >
> > > > Thanks,
> > > >
> > > > -Mike
> > > >
> > > >
> > >
> > >
> >
> >
>
>
*mpower
Message 9 of 10 (65 Views)

Re:

12-11-2002 05:12 AM in reply to: *mpower
What I mean is I think it's silly that you can't put a hole note on a
section view nor do the trails show up. Don't you?

"KJohnson" wrote in message
news:smileyvery-happy:4E9FF22CD9B4BA7E0F3BFB828750058@in.WebX.maYIadrTaRb...
> Because it does?
>
> Kathy Johnson
>
> "mpower" wrote in message
> news:11C4AE3BEADAE9429039BD2F04B84393@in.WebX.maYIadrTaRb...
> > Uhm.... why?
> >
> > "KJohnson" wrote in message
> > news:FAFD923918003BF31926A58262EE433B@in.WebX.maYIadrTaRb...
> > > Trails don't show up in a detail view either.
> > >
> > > Kathy Johnson
> > >
> > > "Sean Dotson" wrote in message
> > > news:5E1F24CB71407B135CDC8E8050512674@in.WebX.maYIadrTaRb...
> > > > See CF under your post. Mine seem to show up... ???
> > > >
> > > > Also you cannot put a hole note on a section view. I don't think
you
> > ever
> > > > could...
> > > >
> > > > --
> > > > Sean Dotson, PE
> > > > http://www.sdotson.com
> > > > Check the Inventor FAQ for most common questions
> > > > http://www.sdotson.com/faq.html
> > > > -----------------------------------------
> > > > "mpower" wrote in message
> > > > news:3FAD09BE32409526D28D6F5E5D78EF5D@in.WebX.maYIadrTaRb...
> > > > > I have a drawing where the threads are shown as hidden lines in
the
> > > > section
> > > > > view, but the detail view of the section does not show them.
> > > Furthermore,
> > > > I
> > > > > can't get the Hole/Thread Notes tool to work to define the threads
> in
> > > the
> > > > > section view. Can anyone tell me why and how to fix it?
> > > > >
> > > > > Check out CF with the same subject.
> > > > >
> > > > > Thanks,
> > > > >
> > > > > -Mike
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>
*Dotson, Sean
Message 10 of 10 (65 Views)

Re:

12-11-2002 05:35 AM in reply to: *mpower
I believe that technically, it's improper to call out a hole in the section
view. Trails..who knows....

--
Sean Dotson, PE
http://www.sdotson.com
Check the Inventor FAQ for most common questions
http://www.sdotson.com/faq.html
-----------------------------------------
"mpower" wrote in message
news:7278EB9780A4263846798E2CEE16D364@in.WebX.maYIadrTaRb...
> What I mean is I think it's silly that you can't put a hole note on a
> section view nor do the trails show up. Don't you?
>
> "KJohnson" wrote in message
> news:smileyvery-happy:4E9FF22CD9B4BA7E0F3BFB828750058@in.WebX.maYIadrTaRb...
> > Because it does?
> >
> > Kathy Johnson
> >
> > "mpower" wrote in message
> > news:11C4AE3BEADAE9429039BD2F04B84393@in.WebX.maYIadrTaRb...
> > > Uhm.... why?
> > >
> > > "KJohnson" wrote in message
> > > news:FAFD923918003BF31926A58262EE433B@in.WebX.maYIadrTaRb...
> > > > Trails don't show up in a detail view either.
> > > >
> > > > Kathy Johnson
> > > >
> > > > "Sean Dotson" wrote in message
> > > > news:5E1F24CB71407B135CDC8E8050512674@in.WebX.maYIadrTaRb...
> > > > > See CF under your post. Mine seem to show up... ???
> > > > >
> > > > > Also you cannot put a hole note on a section view. I don't think
> you
> > > ever
> > > > > could...
> > > > >
> > > > > --
> > > > > Sean Dotson, PE
> > > > > http://www.sdotson.com
> > > > > Check the Inventor FAQ for most common questions
> > > > > http://www.sdotson.com/faq.html
> > > > > -----------------------------------------
> > > > > "mpower" wrote in message
> > > > > news:3FAD09BE32409526D28D6F5E5D78EF5D@in.WebX.maYIadrTaRb...
> > > > > > I have a drawing where the threads are shown as hidden lines in
> the
> > > > > section
> > > > > > view, but the detail view of the section does not show them.
> > > > Furthermore,
> > > > > I
> > > > > > can't get the Hole/Thread Notes tool to work to define the threa
ds
> > in
> > > > the
> > > > > > section view. Can anyone tell me why and how to fix it?
> > > > > >
> > > > > > Check out CF with the same subject.
> > > > > >
> > > > > > Thanks,
> > > > > >
> > > > > > -Mike
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>
Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.