Inventor General Discussion

Inventor General Discussion

Reply
*A., Kirk
Message 1 of 2 (35 Views)

System hangs while doing a "Save Copy As"

35 Views, 1 Replies
11-04-2002 12:07 AM
I migrated several of my "Larger" assemblies so that I could test Inventor
6. I am not going to put it into production until SP1 is tested. I have
had several problems with v6, but most of them was something that I was
doing wrong.

I have had (on several occasions) while working with these files, the
system will hang when I do a "Save Copy As". I opened task manager and
Inventor is at 0% CPU usage, and System Idle Process is at 99%, but I still
have the hour-glass icon for my cursor. The only way that I have found to
get out of this is to "End Process" on Inventor.exe.

All my files are on a server. Could this be causing this type of problem?
Is this a known issue and something that will possibly be addressed in the
sp1?

Thanks
Kirk
--
Inventor 5.3 sp2 and 6.0
Win XP Pro
P4, 2 Ghz, 512M
Gloria II-64
nVidia v6.13.10.4041
1280x1024, 32 Bit
*Roger
Message 2 of 2 (35 Views)

Re: System hangs while doing a "Save Copy As"

11-04-2002 05:20 PM in reply to: *A., Kirk
I have the same problem when I use the "save as" "open" "New" "Project" and
"Place Component" We have 3 licences and the same problem on all off them...
Extremely despairing!!!

Any others have the problem when using this dialog boxes??? Please Note!!!


"Kirk A." skrev i melding
news:957E313F3E3FDCE377ED0A62CACCDC86@in.WebX.maYIadrTaRb...
> I migrated several of my "Larger" assemblies so that I could test Inventor
> 6. I am not going to put it into production until SP1 is tested. I have
> had several problems with v6, but most of them was something that I was
> doing wrong.
>
> I have had (on several occasions) while working with these files, the
> system will hang when I do a "Save Copy As". I opened task manager and
> Inventor is at 0% CPU usage, and System Idle Process is at 99%, but I
still
> have the hour-glass icon for my cursor. The only way that I have found to
> get out of this is to "End Process" on Inventor.exe.
>
> All my files are on a server. Could this be causing this type of problem?
> Is this a known issue and something that will possibly be addressed in the
> sp1?
>
> Thanks
> Kirk
> --
> Inventor 5.3 sp2 and 6.0
> Win XP Pro
> P4, 2 Ghz, 512M
> Gloria II-64
> nVidia v6.13.10.4041
> 1280x1024, 32 Bit
>
>
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.