Inventor General Discussion

Inventor General Discussion

Reply
*A., Kirk
Message 1 of 2 (38 Views)

System hangs while doing a "Save Copy As"

38 Views, 1 Replies
11-04-2002 12:07 AM
I migrated several of my "Larger" assemblies so that I could test Inventor
6. I am not going to put it into production until SP1 is tested. I have
had several problems with v6, but most of them was something that I was
doing wrong.

I have had (on several occasions) while working with these files, the
system will hang when I do a "Save Copy As". I opened task manager and
Inventor is at 0% CPU usage, and System Idle Process is at 99%, but I still
have the hour-glass icon for my cursor. The only way that I have found to
get out of this is to "End Process" on Inventor.exe.

All my files are on a server. Could this be causing this type of problem?
Is this a known issue and something that will possibly be addressed in the
sp1?

Thanks
Kirk
--
Inventor 5.3 sp2 and 6.0
Win XP Pro
P4, 2 Ghz, 512M
Gloria II-64
nVidia v6.13.10.4041
1280x1024, 32 Bit
*Roger
Message 2 of 2 (38 Views)

Re: System hangs while doing a "Save Copy As"

11-04-2002 05:20 PM in reply to: *A., Kirk
I have the same problem when I use the "save as" "open" "New" "Project" and
"Place Component" We have 3 licences and the same problem on all off them...
Extremely despairing!!!

Any others have the problem when using this dialog boxes??? Please Note!!!


"Kirk A." skrev i melding
news:957E313F3E3FDCE377ED0A62CACCDC86@in.WebX.maYIadrTaRb...
> I migrated several of my "Larger" assemblies so that I could test Inventor
> 6. I am not going to put it into production until SP1 is tested. I have
> had several problems with v6, but most of them was something that I was
> doing wrong.
>
> I have had (on several occasions) while working with these files, the
> system will hang when I do a "Save Copy As". I opened task manager and
> Inventor is at 0% CPU usage, and System Idle Process is at 99%, but I
still
> have the hour-glass icon for my cursor. The only way that I have found to
> get out of this is to "End Process" on Inventor.exe.
>
> All my files are on a server. Could this be causing this type of problem?
> Is this a known issue and something that will possibly be addressed in the
> sp1?
>
> Thanks
> Kirk
> --
> Inventor 5.3 sp2 and 6.0
> Win XP Pro
> P4, 2 Ghz, 512M
> Gloria II-64
> nVidia v6.13.10.4041
> 1280x1024, 32 Bit
>
>
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.