I'am a new user (9 months) of Inventor.
I use cad software full time. (it's my job)
I worked with acad-9 to mdt-5 from 1988 to 2001.
I resisted going over to Inventor !!!!
Now that I have been using 5.3 and now 6, I would never go back.
Most of my problems are user errors and lack of experience with Inventor.
That will be fixed over time.
Thanks
Gaetan Scherer
Atara corp
Montreal
"Stan McLean" wrote in message
news:F17DECAE04080816D46636228B621CB8@in.WebX.maYIadrTaRb...
> Just a sample of the experience I had with IV6 so far. I have gone back
> over several problem I have reported on previous version. Several have
been
> fixed, one or two are still hanging around. Parts that where difficult or
> near impossible in 5.3 and previous are now much easier to create with the
> new modeling tools. But the drawing for this part with only 4 features is
a
> real hog on the IDW (4.3 Mb file).
>
> I find that the door was closed a little on the graphic issues(more
problems
> not less). IV6 is slower in sketch mode (yellow dot keeping up with mouse
> movement). This was not the case with the Beta which I still have running
> with a Geforce 2 MX machine. Selection of parts in Assemblies seems to be
> slightly slower, but I have not verified this yet. Slice graphics in IV6
> gives less problems to my GeForce 4 - 64 Mb in my Dell 8200 notepad.
IV5.3
> frequently painted the whole screen with the capping concrete face until I
> zoomed or panned. At top resolution (1600x1280) I am still limited to 3
to
> 4 windows. At 1280x1024 I have been to 15 windows without a lose of
speed.
>
> As for migrating files - I have done this with 4 assemblies. The lasertec
> demoset, my own project (coffee machine from MDT5 through 4, 5, 5.3), a
> model of a Small Block Chevy Engine, and another clients assembly which
had
> several problems in 5.3. (Could not open a IDW of the assembly in 5.3
> without crashing).
>
> All migrated with no problems except for the following . IV6 did not like
> the error in the Lasertec Project file - WorkGroup and Library pointed to
> the same folder. The coffee machine is fine so far, along with the Chevy
> Engine. As for the client's assembly, IV6 actually open the damaged IDW
and
> showed what IPT's were causing some of the problems. These gave me a
chance
> to fix the assembly that IV5.3 would not let do, because it crashed.
>
> As for the other features and improvements, many I like, especially the
new
> modeling tools. These I have been trying to beat up to see how far I
could
> go before ShapeManager quit. So far, much better than the Beta, which
broke
> easily. Although things can always be improved, I only have to think
where
> I was a few years ago with MDT and what I see and use daily with Inventor
> and my only comment is a big "Wow" and Thanks to people at Autodesk.
>
> Glad to see the news group are broken up. It was way too much to try and
> read the crazy number of posting. It only shows that more people are
using
> Inventor, whether they have problems or not.
>
> Stan McLean
> Le Groupe Buscom
>
>