Inventor General Discussion

Inventor General Discussion

Reply
Active Member
mariappan.u
Posts: 9
Registered: ‎08-26-2011
Message 1 of 7 (505 Views)

STP FILE SHEETMETAL FLAT PATTERN

505 Views, 6 Replies
12-06-2011 02:32 AM

Hi all,

 

I have stp file to convert sheetmetal flat pattern.i can convert some portion but i cant convert particular portions.

 

see attached file.

 

 

waitng for solution.

 

 

*Expert Elite*
JDMather
Posts: 28,228
Registered: ‎04-20-2006
Message 2 of 7 (495 Views)

Re: STP FILE SHEETMETAL FLAT PATTERN

12-06-2011 04:43 AM in reply to: mariappan.u

mariappan.u wrote:

 

waitng for solution.

  


You might be waiting a while - of course Inventor will not unfold a jpg image. 

You will need to attach the ipt file here.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2015 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Active Member
mariappan.u
Posts: 9
Registered: ‎08-26-2011
Message 3 of 7 (462 Views)

Re: STP FILE SHEETMETAL FLAT PATTERN

12-06-2011 08:00 PM in reply to: JDMather

I CANT ATTACH STP FILE IN THIS FORUM

*Expert Elite*
JDMather
Posts: 28,228
Registered: ‎04-20-2006
Message 4 of 7 (453 Views)

Re: STP FILE SHEETMETAL FLAT PATTERN

12-07-2011 04:09 AM in reply to: mariappan.u

Right click on the file name and select Send to Compressed (zipped) Folder

and attach the resulting *.zip file here

or

attach the translated *.ipt file here.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2015 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Active Member
mariappan.u
Posts: 9
Registered: ‎08-26-2011
Message 5 of 7 (433 Views)

Re: STP FILE SHEETMETAL FLAT PATTERN

12-08-2011 05:20 PM in reply to: mariappan.u

here is the attachment.

*Expert Elite*
JDMather
Posts: 28,228
Registered: ‎04-20-2006
Message 6 of 7 (418 Views)

Re: STP FILE SHEETMETAL FLAT PATTERN

12-09-2011 05:05 AM in reply to: mariappan.u

If you look in this area from the right side this face (and I assume the opposite face) is warped.

This was hard to see from the jpg you originally posted.

 

You will have to Delete Face and rebuild that area of the part. 

 

Warped Faces.png

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2015 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
*Expert Elite*
JDMather
Posts: 28,228
Registered: ‎04-20-2006
Message 7 of 7 (409 Views)

Re: STP FILE SHEETMETAL FLAT PATTERN

12-09-2011 06:56 AM in reply to: JDMather

Considering manufacturing tolerance - perhaps this is close enough.

 

 

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2015 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.