Inventor General Discussion

Inventor General Discussion

Reply
Active Member
blmckenzi3
Posts: 6
Registered: ‎12-19-2012
Message 1 of 11 (742 Views)
Accepted Solution

Square helix??

742 Views, 10 Replies
12-20-2012 03:55 PM

ok so what ive been trying to do for about a week now is make a helix that sweeps around a rectangular prism i was able to make it in solid works but i cant find a way to do it in inventor. any suggestions would help

Hi blmckenzi3,

 

There are two example models you can find attached at this link:

http://forums.autodesk.com/t5/Autodesk-Inventor/Making-a-rectangular-spring/m-p/3441447

 

I hope this helps.
Best of luck to you in all of your Inventor pursuits,
Curtis
http://inventortrenches.blogspot.com

*Expert Elite*
blair
Posts: 4,450
Registered: ‎11-13-2006
Message 2 of 11 (739 Views)

Re: Square helix??

12-20-2012 04:21 PM in reply to: blmckenzi3

Please post a picture of what you are trying to achieve.

Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below.

IV2015 SP1 PDSU / Sim Mech 2015 r1 /
Win7-64
EVGA X79 - Classified, iCore7 3930k 32Gb Quad-Channel
950Gb (2 x 500Gb Sata III SSD RAID0 Adaptec 6805E Controller)
Nvidia GTX-690 Classified - 344.75
SpacePilot Pro 10.2.0 / 17.2.0.11011 / 4.17
Delta Tau Chi ΔΤΧ
Active Member
blmckenzi3
Posts: 6
Registered: ‎12-19-2012
Message 3 of 11 (731 Views)

Re: Square helix??

12-20-2012 05:16 PM in reply to: blair

somethin like this

Employee
yuhanzhang
Posts: 480
Registered: ‎01-06-2009
Message 4 of 11 (722 Views)

Re: Square helix??

12-20-2012 06:37 PM in reply to: blmckenzi3

You can try below workflow:

 

1. Download the attached sample excel which defines the 3D points for creating the sweep path.

2. New a part document and create a 3D sketch.

3. On the 3D Sketch tab, call Insert->Points command.

4. With the Open dialog, choose the excel and click the Options... button to change the Import Options to Create lines.

5. Click OK and Open to create the 3D sketch lines, and then click the Bend command and select each corner point to create the bend so the sweep is smooth at the corners.

6. Exit 3D sketch, and create a 2D sketch bases on XZ plane, and create a circle with its center on origin.

7. Exit 2D sketch, and create a sweep feature with the circle as profile and the 3D sketch lines as path.

 

Hope  this helps.

 



Rocky Zhang
Inventor API
Manufacturing Solutions
Autodesk, Inc.

*Expert Elite*
Curtis_Waguespack
Posts: 3,000
Registered: ‎03-08-2006
Message 5 of 11 (710 Views)

Re: Square helix??

12-20-2012 07:48 PM in reply to: blmckenzi3

Hi blmckenzi3,

 

There are two example models you can find attached at this link:

http://forums.autodesk.com/t5/Autodesk-Inventor/Making-a-rectangular-spring/m-p/3441447

 

I hope this helps.
Best of luck to you in all of your Inventor pursuits,
Curtis
http://inventortrenches.blogspot.com



  solution.png  Did you find this reply helpful ? If so please use the Accept as Solution or  Kudos button below.





Active Member
blmckenzi3
Posts: 6
Registered: ‎12-19-2012
Message 6 of 11 (681 Views)

Re: Square helix??

12-21-2012 05:10 AM in reply to: yuhanzhang

that excel file didnt work i got to the insert points commad and selected the excel file chose the create lines option hit open and nothing happened

Active Member
blmckenzi3
Posts: 6
Registered: ‎12-19-2012
Message 7 of 11 (675 Views)

Re: Square helix??

12-21-2012 05:33 AM in reply to: Curtis_Waguespack

how do you make things translucent? sorry im kinda new at this

*Expert Elite*
Curtis_Waguespack
Posts: 3,000
Registered: ‎03-08-2006
Message 8 of 11 (659 Views)

Re: Square helix??

12-21-2012 07:23 AM in reply to: blmckenzi3

Hi blmckenzi3,

 

You can do this by extruding a profile as a surface (rather than a solid).

 

Autodesk Inventor Extrude As Surface.png

 

You might use the End of Part marker in the examples at the link to examine how the features were created one at a time.

 

Autodesk Inventor End of Part.png

 

This is often a good way to learn a new technique. Post back if you have more questions and I'm sure someone will help.

 

I hope this helps.
Best of luck to you in all of your Inventor pursuits,
Curtis
http://inventortrenches.blogspot.com



  solution.png  Did you find this reply helpful ? If so please use the Accept as Solution or  Kudos button below.





*Expert Elite*
Curtis_Waguespack
Posts: 3,000
Registered: ‎03-08-2006
Message 9 of 11 (653 Views)

Re: Square helix??

12-21-2012 07:32 AM in reply to: Curtis_Waguespack

Hi blmckenzi3,

 

You might also see JDMather's knot tutorial for more on the general technique:

http://home.pct.edu/~jmather/content/DSG322/Inventor%20Tutorials/Inventor%2011%20Tutorial%207.pdf

http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm

 

I hope this helps.
Best of luck to you in all of your Inventor pursuits,
Curtis
http://inventortrenches.blogspot.com



  solution.png  Did you find this reply helpful ? If so please use the Accept as Solution or  Kudos button below.





Active Member
blmckenzi3
Posts: 6
Registered: ‎12-19-2012
Message 10 of 11 (617 Views)

Re: Square helix??

12-21-2012 11:50 AM in reply to: Curtis_Waguespack

Thanks everyone! oh man ive been trying to do this for almost two weeks now :smileytongue:

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.