Inventor General Discussion

Inventor General Discussion

Reply
New Member
1 Posts
0 Kudos
Registered: ‎01-11-2013
Post 1 of 2
Accepted Solution

splitting curved faces into two faces

447 Views, 1 Replies
01-11-2013 08:13 PM

i got Inventor recently, and i've been working on a model of a longboard just to teach myself how to use the tools in Inventor. right now i'm trying to color areas for the griptape pattern so i drew the 2D pattern and projected it onto the 3D model of the longboard. but when i tried to split the faces of the model along the projected pattern only a few of the projected lines split the faces. for other faces i kept getting these errors: 

Create parting line failed
Crane.ipt: Errors occurred during update
Split11: Could not build this Split
The attempted operation did not produce a meaningful result. Try with different inputs.

i have no idea what to do to fix this. help?

You do not have to create a 3D sketch - you can split a part face directly with a 2D sketch.

 

My recommendations:

You are doing wayyyyyyyy too much work.
Go  through the built in Help>Learning Tools>Tutorials and Skillbuilders

Go through http://home.pct.edu/~jmather/SkillsUSA%20University.pdf

Go through http://inventortrenches.blogspot.com/p/inventor-tutorials.html

Go through the rest of the tutorials in my signature and THEN come back to this project that you are working on.

*Expert Elite*
28,585 Posts
2,119 Kudos
Registered: ‎04-20-2006
Post 2 of 2

Re: splitting curved faces into two faces

01-12-2013 10:11 AM in reply to: thatnewguy

You do not have to create a 3D sketch - you can split a part face directly with a 2D sketch.

 

My recommendations:

You are doing wayyyyyyyy too much work.
Go  through the built in Help>Learning Tools>Tutorials and Skillbuilders

Go through http://home.pct.edu/~jmather/SkillsUSA%20University.pdf

Go through http://inventortrenches.blogspot.com/p/inventor-tutorials.html

Go through the rest of the tutorials in my signature and THEN come back to this project that you are working on.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2015 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post