Hi!
I'd like to split Solid8 (in two) along YZ plane, but Inventor doesn't do it. I guess, there's something went wrong at the previous split, but what?
Thanks,
Zoltán
Solved! Go to Solution.
Solved by WHolzwarth. Go to Solution.
There were two tiny lumps left after the first split.
I deleted them with DeleteFace1
Walter
Walter Holzwarth
Not sure why it wouldn't work.
But as a workaround -
Split the part removing one half.
Now Mirror the remaining half set to create New Body.
@WHolzwarth wrote:
There were two tiny lumps left after the first split.
I deleted them with DeleteFace1
Walter
Good catch, but OP is using 2011. A screen capture might help.
Thanks, Jeffrey. Now as 2011 file
Walter Holzwarth
Thank you for fast reply! I have Inventor 2015 trial too, so I could open it.
JDMather: part seems mirror to YZ plane but it is not. There's a slight difference between the two long flanges' size.
Regards,
Zoltán
Nice Walter!
Admaiora
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.