Inventor General Discussion

Inventor General Discussion

Reply
New Member
T.Adams
Posts: 2
Registered: ‎07-31-2012
Message 1 of 5 (189 Views)

SOLID BODIES (BASE)

189 Views, 4 Replies
08-31-2012 11:40 AM

I need help changing solids into working sheetmetal parts that can be manipulated such as flat patterns.  I am getting base models with flanges and features as one solid that i can not change and use like i need.  How do i change one of these solid bodies into a working sheet metal part?

*Pro
jletcher
Posts: 1,983
Registered: ‎05-18-2011
Message 2 of 5 (180 Views)

Re: SOLID BODIES (BASE)

08-31-2012 12:20 PM in reply to: T.Adams

What version and can you post the part so we can take a look can't help if we don't know what it is or looks like..:smileyhappy:


Please mark this response as "Accept as Solution" if it answers your question.

James Letcher
2012 Factory Design Suite ( will not load 2013)
What happen to my Inventor :-(
New Member
T.Adams
Posts: 2
Registered: ‎07-31-2012
Message 3 of 5 (177 Views)

Re: SOLID BODIES (BASE)

08-31-2012 12:23 PM in reply to: jletcher

Inventor 2012 and they are simple parts with only one flange but woulde be nice to flatten out instead of doing all the math to try to get a flat pattern.

*Expert Elite*
JDMather
Posts: 28,253
Registered: ‎04-20-2006
Message 4 of 5 (161 Views)

Re: SOLID BODIES (BASE)

08-31-2012 06:25 PM in reply to: T.Adams

Does it have bends?

Did you click Convert to Sheet Metal?

Did you set the sheet metal style to the part thickness.

Is it a valid uniform thickness part?
Can you attach a picture here?

Can you attach the ipt file here?

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2015 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Employee
Yijiang.Cai
Posts: 359
Registered: ‎05-20-2008
Message 5 of 5 (123 Views)

Re: SOLID BODIES (BASE)

09-03-2012 01:33 AM in reply to: T.Adams

If you could provide dataset or image, it should be better to figure out the issue. Based on the details you provided, you should create the multi solids and would like to convert it to sheet metal. But current Inventor does not support multil solids in sheet metal environment. So I recommend you to derive this multi solids base to parts, and every part has one solid, then the part can be converted to sheet metal. So that you could take downstream workflow in sheet metal environment.

Thanks,
River Cai

Inventor Quality Assurance Team
Autodesk, Inc.
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.