Slice graphics

[Anonymous]

IV6 SP2 with MatroxG400 card latest drivers. When I slice the graphics it
works. As soon as you zoom in or out the part becomes complete again. You
have to randomly keep zooming in or out until the slice graphics comes back.
If the part is rotated slightly the problem goes away. It occurs only when
you work normal to a work plane. Never had this problem with 5.3, so is it
a bug, should I report it, does anyone else have the problem?
Denis

[Anonymous]

#Sorry, when I said rotate the part, I meant rotate the view.


"Denis Hodgins" wrote in message
news:5A2293A34676EA5401BE39BF8CDAEDDA@in.WebX.maYIadrTaRb...
> IV6 SP2 with MatroxG400 card latest drivers. When I slice the graphics it
> works. As soon as you zoom in or out the part becomes complete again.
You
> have to randomly keep zooming in or out until the slice graphics comes
back.
> If the part is rotated slightly the problem goes away. It occurs only
when
> you work normal to a work plane. Never had this problem with 5.3, so is
it
> a bug, should I report it, does anyone else have the problem?
> Denis
>
>

[jorgen]

Matrox......
Say after me: I WILL NEVER USE A ATI OR MATROX CARD AGAIN, I will never use a ati or matrox card again, I will never use...........

Cheers !

[SveinE]

Thats a good one Jorgen:-)

AND NOW EVERYBODY: I WILL NEVER USE A ATI OR MATROX CARD AGAIN, I will never use a ati or matrox card again, I will never use...........

[Anonymous]

Guys, I've got some surplus cards here for
sale:

1xMatrox G100

2x ATI Rage128

1x ATI RadeonVE

Really cheap!

Regards,
--
Leo Laimer
Maschinen- und
Fertigungstechnik
A-4820 Bad Ischl - Austria

[SveinE]

How flat can you get them with a hammer?

[Anonymous]

Seriously, it's the card. Matrox cards are just garbage for 3D CAD
applications

--
Sean Dotson, PE
http://www.sdotson.com
Check the Inventor FAQ for most common questions
www.sdotson.com/faq.html
----------------------------------------------------------------------------
------
"Denis Hodgins" wrote in message
news:5A2293A34676EA5401BE39BF8CDAEDDA@in.WebX.maYIadrTaRb...
> IV6 SP2 with MatroxG400 card latest drivers. When I slice the graphics it
> works. As soon as you zoom in or out the part becomes complete again.
You
> have to randomly keep zooming in or out until the slice graphics comes
back.
> If the part is rotated slightly the problem goes away. It occurs only
when
> you work normal to a work plane. Never had this problem with 5.3, so is
it
> a bug, should I report it, does anyone else have the problem?
> Denis
>
>

[Anonymous]

Buy and try yourself...

<g>

--
Leo Laimer
Maschinen- und
Fertigungstechnik
A-4820 Bad Ischl - Austria

[jorgen]

Seriously ????? Did you think we were joking??? 😉

[Anonymous]

Is it really the card that's the problem or......

[Anonymous]

Yes it is. Go to Help in IV and se under Graphics
drivers. Look under Matrox and there you can see what's wrong.  Matrox IS
NOT A GRAPHICS CARD I WILL USE.

Birger Knudsen

IMAGINiT / Denmark

style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">

"favline" <mydomain.com> wrote in message
href="news:f13eb6c.8@WebX.maYIadrTaRb">news:f13eb6c.8@WebX.maYIadrTaRb...

Is
it really the card that's the problem or......

[Anonymous]

Of course not but Denis might have...

--
Sean Dotson, PE

href="http://www.sdotson.com">http://www.sdotson.com
Check the Inventor
FAQ for most common questions

href="http://www.sdotson.com/faq.html">www.sdotson.com/faq.html
----------------------------------------------------------------------------------

style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">

"jorgen" <bjornes@email.com>
wrote in message
href="news:f13eb6c.7@WebX.maYIadrTaRb">news:f13eb6c.7@WebX.maYIadrTaRb...

Seriously
????? Did you think we were joking??? 😉

[SveinE]

Wasn`t trying to offend you Leo or anyone else
Sorry 🙂
Yust thought Jorgens statement was funny.

Regards Svein

[Anonymous]

Svein,

I took it as a joke too.

Just invited you to buy one from me and try to
flatten it with the hammer...

<G>

Regards,
--
Leo Laimer
Maschinen- und
Fertigungstechnik
A-4820 Bad Ischl - Austria

[jorgen]

It is easy to misunderstand in newsgroups.

Svein, I dont think he was offended.
Did you not notice the ?
I think that means giggle. (correct me if I'm wrong).

So basically he wanted you to buy one of his useless cards to try hammering it flat yourself .

(hopefully this is one of the last replies to this post, or Anne will close it for us).

Jorgen

[SveinE]

Thanks.
It is tempting.

Regards Svein

"Case closed"

[MechMan_]

= Grin.



MechMan

[Anonymous]

I think I get the message, go to a corner and chant "replace the graphics
card, replace the graphics card...........
"Denis Hodgins" wrote in message
news:5A2293A34676EA5401BE39BF8CDAEDDA@in.WebX.maYIadrTaRb...
> IV6 SP2 with MatroxG400 card latest drivers. When I slice the graphics it
> works. As soon as you zoom in or out the part becomes complete again.
You
> have to randomly keep zooming in or out until the slice graphics comes
back.
> If the part is rotated slightly the problem goes away. It occurs only
when
> you work normal to a work plane. Never had this problem with 5.3, so is
it
> a bug, should I report it, does anyone else have the problem?
> Denis
>
>