Inventor General Discussion

Inventor General Discussion

Reply
*Bedford, Chris
Message 1 of 7 (51 Views)

sketch constraint toolbar - do we have one?

51 Views, 6 Replies
11-27-2002 06:50 AM
I posted this on the 22nd with no response. Surely someone else has thought
this! (& don't call me Shirley)

I am looking to display the sketch constraints icons full time while I am
sketching.

Is this possible or do I have to click on the single icon for constraints
and then on the desired constraint icon everytime? (2 clicks instead of 1)

Thanks

Chris B
*Maenpaa, Mike
Message 2 of 7 (51 Views)

Re: sketch constraint toolbar - do we have one?

11-27-2002 06:50 AM in reply to: *Bedford, Chris
Chris,
Sean replied to your question. I cut & pasted it below.
Mike


Yes, tools/customize, middle tab, 2d sketch constraints.

Don't expect it to stay in place however

-Sean
www.sdotson.com

"Chris Bedford" wrote in message
news:5BC6CEE18CB59A0EE3E5D9BA43D971A2@in.WebX.maYIadrTaRb...
> I posted this on the 22nd with no response. Surely someone else has
thought
> this! (& don't call me Shirley)
>
> I am looking to display the sketch constraints icons full time while I am
> sketching.
>
> Is this possible or do I have to click on the single icon for constraints
> and then on the desired constraint icon everytime? (2 clicks instead of 1)
>
> Thanks
>
> Chris B
>
>
*Caldwell, Larry
Message 3 of 7 (51 Views)

Re: sketch constraint toolbar - do we have one?

11-27-2002 07:11 AM in reply to: *Bedford, Chris
Tools/Customize/Toolbars
~Larry

"Chris Bedford" wrote in message
news:5BC6CEE18CB59A0EE3E5D9BA43D971A2@in.WebX.maYIadrTaRb...
> I posted this on the 22nd with no response. Surely someone else has
thought
> this! (& don't call me Shirley)
>
> I am looking to display the sketch constraints icons full time while I am
> sketching.
>
> Is this possible or do I have to click on the single icon for constraints
> and then on the desired constraint icon everytime? (2 clicks instead of 1)
>
> Thanks
>
> Chris B
>
>
*Jaquith, Walt
Message 4 of 7 (51 Views)

Re: sketch constraint toolbar - do we have one?

11-27-2002 07:14 AM in reply to: *Bedford, Chris
The toolbar is there. It's called "2D Sketch Constraints". You can show
it, and dock it anywhere you like (until IV invokes it's Random Interface
Scramble Routine...see "oh for crying out loud (toolbars)" on 11-21).

Toolbars you show this way will be visible all the time, not just in sketch
mode. It's a pain, but for me having this toolbar handy is worth it. To
get to the dialog box for customizing toolbars, right-click on a blank spot
in the toolbar area, and choose customize. Go to the toolbars tab. Pick
the toolbar and select show.

Cheers,
Walt

"Chris Bedford" wrote in message
news:5BC6CEE18CB59A0EE3E5D9BA43D971A2@in.WebX.maYIadrTaRb...
> I posted this on the 22nd with no response. Surely someone else has
thought
> this! (& don't call me Shirley)
>
> I am looking to display the sketch constraints icons full time while I am
> sketching.
>
> Is this possible or do I have to click on the single icon for constraints
> and then on the desired constraint icon everytime? (2 clicks instead of 1)
>
> Thanks
>
> Chris B
>
>
*Bedford, Chris
Message 5 of 7 (51 Views)

Re:

11-27-2002 10:11 AM in reply to: *Bedford, Chris
Aha! Thanks Guys.

Chris B

Walt Jaquith wrote in message
news:E7B284C0137BCD7182E887B4591CF562@in.WebX.maYIadrTaRb...
> The toolbar is there. It's called "2D Sketch Constraints". You can show
> it, and dock it anywhere you like (until IV invokes it's Random Interface
> Scramble Routine...see "oh for crying out loud (toolbars)" on 11-21).
>
> Toolbars you show this way will be visible all the time, not just in
sketch
> mode. It's a pain, but for me having this toolbar handy is worth it. To
> get to the dialog box for customizing toolbars, right-click on a blank
spot
> in the toolbar area, and choose customize. Go to the toolbars tab. Pick
> the toolbar and select show.
>
> Cheers,
> Walt
>
> "Chris Bedford" wrote in message
> news:5BC6CEE18CB59A0EE3E5D9BA43D971A2@in.WebX.maYIadrTaRb...
> > I posted this on the 22nd with no response. Surely someone else has
> thought
> > this! (& don't call me Shirley)
> >
> > I am looking to display the sketch constraints icons full time while I
am
> > sketching.
> >
> > Is this possible or do I have to click on the single icon for
constraints
> > and then on the desired constraint icon everytime? (2 clicks instead of
1)
> >
> > Thanks
> >
> > Chris B
> >
> >
>
>
*KJohnson
Message 6 of 7 (51 Views)

Re:

11-27-2002 10:02 PM in reply to: *Bedford, Chris
Can you drag the constraint icons to the panel bar? That way they only show
in sketch mode.

Kathy Johnson

"Walt Jaquith" wrote in message
news:E7B284C0137BCD7182E887B4591CF562@in.WebX.maYIadrTaRb...
> The toolbar is there. It's called "2D Sketch Constraints". You can show
> it, and dock it anywhere you like (until IV invokes it's Random Interface
> Scramble Routine...see "oh for crying out loud (toolbars)" on 11-21).
>
> Toolbars you show this way will be visible all the time, not just in
sketch
> mode. It's a pain, but for me having this toolbar handy is worth it. To
> get to the dialog box for customizing toolbars, right-click on a blank
spot
> in the toolbar area, and choose customize. Go to the toolbars tab. Pick
> the toolbar and select show.
>
> Cheers,
> Walt
>
> "Chris Bedford" wrote in message
> news:5BC6CEE18CB59A0EE3E5D9BA43D971A2@in.WebX.maYIadrTaRb...
> > I posted this on the 22nd with no response. Surely someone else has
> thought
> > this! (& don't call me Shirley)
> >
> > I am looking to display the sketch constraints icons full time while I
am
> > sketching.
> >
> > Is this possible or do I have to click on the single icon for
constraints
> > and then on the desired constraint icon everytime? (2 clicks instead of
1)
> >
> > Thanks
> >
> > Chris B
> >
> >
>
>
*J, Dave
Message 7 of 7 (51 Views)

Re:

11-28-2002 08:50 PM in reply to: *Bedford, Chris
Yeah, that's what I did. Got rid of the icons I never use and added the ones I
use constantly. (to the 2d sketch panel bar)

--
Dave Jacquemotte
davej@autoconcorp.com


"KJohnson" wrote in message
news:B24B99B4CE0BB2279024562B4D68AE80@in.WebX.maYIadrTaRb...
> Can you drag the constraint icons to the panel bar? That way they only show
> in sketch mode.
>
> Kathy Johnson
>
> "Walt Jaquith" wrote in message
> news:E7B284C0137BCD7182E887B4591CF562@in.WebX.maYIadrTaRb...
> > The toolbar is there. It's called "2D Sketch Constraints". You can show
> > it, and dock it anywhere you like (until IV invokes it's Random Interface
> > Scramble Routine...see "oh for crying out loud (toolbars)" on 11-21).
> >
> > Toolbars you show this way will be visible all the time, not just in
> sketch
> > mode. It's a pain, but for me having this toolbar handy is worth it. To
> > get to the dialog box for customizing toolbars, right-click on a blank
> spot
> > in the toolbar area, and choose customize. Go to the toolbars tab. Pick
> > the toolbar and select show.
> >
> > Cheers,
> > Walt
> >
> > "Chris Bedford" wrote in message
> > news:5BC6CEE18CB59A0EE3E5D9BA43D971A2@in.WebX.maYIadrTaRb...
> > > I posted this on the 22nd with no response. Surely someone else has
> > thought
> > > this! (& don't call me Shirley)
> > >
> > > I am looking to display the sketch constraints icons full time while I
> am
> > > sketching.
> > >
> > > Is this possible or do I have to click on the single icon for
> constraints
> > > and then on the desired constraint icon everytime? (2 clicks instead of
> 1)
> > >
> > > Thanks
> > >
> > > Chris B
> > >
> > >
> >
> >
>
>
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Are You Going To Be @ AU 2014? Feel free to drop by our AU topic post and share your plans, plug a class that you're teaching, or simply check out who else from the community might be in attendance. Ohh and don't forgot to stop by the Autodesk Help | Learn | Collaborate booths in the Exhibit Hall and meet our community team if you get a chance!