sketch constraint toolbar - do we have one?

[Anonymous]

I posted this on the 22nd with no response. Surely someone else has thought
this! (& don't call me Shirley)

I am looking to display the sketch constraints icons full time while I am
sketching.

Is this possible or do I have to click on the single icon for constraints
and then on the desired constraint icon everytime? (2 clicks instead of 1)

Thanks

Chris B

[Anonymous]

Chris,
Sean replied to your question. I cut & pasted it below.
Mike


Yes, tools/customize, middle tab, 2d sketch constraints.

Don't expect it to stay in place however

-Sean
www.sdotson.com

"Chris Bedford" wrote in message
news:5BC6CEE18CB59A0EE3E5D9BA43D971A2@in.WebX.maYIadrTaRb...
> I posted this on the 22nd with no response. Surely someone else has
thought
> this! (& don't call me Shirley)
>
> I am looking to display the sketch constraints icons full time while I am
> sketching.
>
> Is this possible or do I have to click on the single icon for constraints
> and then on the desired constraint icon everytime? (2 clicks instead of 1)
>
> Thanks
>
> Chris B
>
>

[Anonymous]

Tools/Customize/Toolbars
~Larry

"Chris Bedford" wrote in message
news:5BC6CEE18CB59A0EE3E5D9BA43D971A2@in.WebX.maYIadrTaRb...
> I posted this on the 22nd with no response. Surely someone else has
thought
> this! (& don't call me Shirley)
>
> I am looking to display the sketch constraints icons full time while I am
> sketching.
>
> Is this possible or do I have to click on the single icon for constraints
> and then on the desired constraint icon everytime? (2 clicks instead of 1)
>
> Thanks
>
> Chris B
>
>

[Anonymous]

The toolbar is there. It's called "2D Sketch Constraints". You can show
it, and dock it anywhere you like (until IV invokes it's Random Interface
Scramble Routine...see "oh for crying out loud (toolbars)" on 11-21).

Toolbars you show this way will be visible all the time, not just in sketch
mode. It's a pain, but for me having this toolbar handy is worth it. To
get to the dialog box for customizing toolbars, right-click on a blank spot
in the toolbar area, and choose customize. Go to the toolbars tab. Pick
the toolbar and select show.

Cheers,
Walt

"Chris Bedford" wrote in message
news:5BC6CEE18CB59A0EE3E5D9BA43D971A2@in.WebX.maYIadrTaRb...
> I posted this on the 22nd with no response. Surely someone else has
thought
> this! (& don't call me Shirley)
>
> I am looking to display the sketch constraints icons full time while I am
> sketching.
>
> Is this possible or do I have to click on the single icon for constraints
> and then on the desired constraint icon everytime? (2 clicks instead of 1)
>
> Thanks
>
> Chris B
>
>

[Anonymous]

Aha! Thanks Guys.

Chris B

Walt Jaquith wrote in message
news:E7B284C0137BCD7182E887B4591CF562@in.WebX.maYIadrTaRb...
> The toolbar is there. It's called "2D Sketch Constraints". You can show
> it, and dock it anywhere you like (until IV invokes it's Random Interface
> Scramble Routine...see "oh for crying out loud (toolbars)" on 11-21).
>
> Toolbars you show this way will be visible all the time, not just in
sketch
> mode. It's a pain, but for me having this toolbar handy is worth it. To
> get to the dialog box for customizing toolbars, right-click on a blank
spot
> in the toolbar area, and choose customize. Go to the toolbars tab. Pick
> the toolbar and select show.
>
> Cheers,
> Walt
>
> "Chris Bedford" wrote in message
> news:5BC6CEE18CB59A0EE3E5D9BA43D971A2@in.WebX.maYIadrTaRb...
> > I posted this on the 22nd with no response. Surely someone else has
> thought
> > this! (& don't call me Shirley)
> >
> > I am looking to display the sketch constraints icons full time while I
am
> > sketching.
> >
> > Is this possible or do I have to click on the single icon for
constraints
> > and then on the desired constraint icon everytime? (2 clicks instead of
1)
> >
> > Thanks
> >
> > Chris B
> >
> >
>
>

[Anonymous]

Can you drag the constraint icons to the panel bar? That way they only show
in sketch mode.

Kathy Johnson

"Walt Jaquith" wrote in message
news:E7B284C0137BCD7182E887B4591CF562@in.WebX.maYIadrTaRb...
> The toolbar is there. It's called "2D Sketch Constraints". You can show
> it, and dock it anywhere you like (until IV invokes it's Random Interface
> Scramble Routine...see "oh for crying out loud (toolbars)" on 11-21).
>
> Toolbars you show this way will be visible all the time, not just in
sketch
> mode. It's a pain, but for me having this toolbar handy is worth it. To
> get to the dialog box for customizing toolbars, right-click on a blank
spot
> in the toolbar area, and choose customize. Go to the toolbars tab. Pick
> the toolbar and select show.
>
> Cheers,
> Walt
>
> "Chris Bedford" wrote in message
> news:5BC6CEE18CB59A0EE3E5D9BA43D971A2@in.WebX.maYIadrTaRb...
> > I posted this on the 22nd with no response. Surely someone else has
> thought
> > this! (& don't call me Shirley)
> >
> > I am looking to display the sketch constraints icons full time while I
am
> > sketching.
> >
> > Is this possible or do I have to click on the single icon for
constraints
> > and then on the desired constraint icon everytime? (2 clicks instead of
1)
> >
> > Thanks
> >
> > Chris B
> >
> >
>
>

[Anonymous]

Yeah, that's what I did. Got rid of the icons I never use and added the ones I
use constantly. (to the 2d sketch panel bar)

--
Dave Jacquemotte
davej@autoconcorp.com


"KJohnson" wrote in message
news:B24B99B4CE0BB2279024562B4D68AE80@in.WebX.maYIadrTaRb...
> Can you drag the constraint icons to the panel bar? That way they only show
> in sketch mode.
>
> Kathy Johnson
>
> "Walt Jaquith" wrote in message
> news:E7B284C0137BCD7182E887B4591CF562@in.WebX.maYIadrTaRb...
> > The toolbar is there. It's called "2D Sketch Constraints". You can show
> > it, and dock it anywhere you like (until IV invokes it's Random Interface
> > Scramble Routine...see "oh for crying out loud (toolbars)" on 11-21).
> >
> > Toolbars you show this way will be visible all the time, not just in
> sketch
> > mode. It's a pain, but for me having this toolbar handy is worth it. To
> > get to the dialog box for customizing toolbars, right-click on a blank
> spot
> > in the toolbar area, and choose customize. Go to the toolbars tab. Pick
> > the toolbar and select show.
> >
> > Cheers,
> > Walt
> >
> > "Chris Bedford" wrote in message
> > news:5BC6CEE18CB59A0EE3E5D9BA43D971A2@in.WebX.maYIadrTaRb...
> > > I posted this on the 22nd with no response. Surely someone else has
> > thought
> > > this! (& don't call me Shirley)
> > >
> > > I am looking to display the sketch constraints icons full time while I
> am
> > > sketching.
> > >
> > > Is this possible or do I have to click on the single icon for
> constraints
> > > and then on the desired constraint icon everytime? (2 clicks instead of
> 1)
> > >
> > > Thanks
> > >
> > > Chris B
> > >
> > >
> >
> >
>
>