Inventor General Discussion

Inventor General Discussion

Reply
Contributor
drafter
Posts: 25
Registered: ‎07-13-2011
Message 1 of 13 (203 Views)
Accepted Solution

sheet metal ??

203 Views, 12 Replies
12-15-2011 09:42 AM

I need to know how to take a know length of material and bend the entire thing into an arc with a radius of 16.75, and I need to know how to do this in inventor so I can generate where the bend points are so we can bend it in a press break.  If anyone can help asap that would be greatly appreciated.

So what I posted isn't what you're looking for?

*Expert Elite*
JDMather
Posts: 28,200
Registered: ‎04-20-2006
Message 2 of 13 (188 Views)

Re: sheet metal ??

12-15-2011 10:09 AM in reply to: drafter

Can you create the part using stardard tools in finished form (sounds pretty simple) and attach here so that someone can demonstrate how to do the same part with sheetmetal Fold (or other technique as appropriate).

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2015 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
*Expert Elite*
Curtis_Waguespack
Posts: 3,000
Registered: ‎03-08-2006
Message 3 of 13 (187 Views)

Re: sheet metal ??

12-15-2011 10:10 AM in reply to: drafter

Hi drafter,

 

I think the Fold tool in the Sheet Metal environment is what you're looking for in this case. Attached is an example. Keep in mind that your material thickness (Extrusion thickness in my example) needs to match the sheet metal Thickness parameter to get this to work.

 

I hope this helps.
Best of luck to you in all of your Inventor pursuits,
Curtis
http://inventortrenches.blogspot.com

 

 

 

 

 

 



  solution.png  Did you find this reply helpful ? If so please use the Accept as Solution or  Kudos button below.





Member
dennymet
Posts: 5
Registered: ‎10-31-2011
Message 4 of 13 (180 Views)

Re: sheet metal ??

12-15-2011 11:00 AM in reply to: drafter

Are you going to be step bending this?

 

Ironically, I just answered a very similar question on the SolidWorks forum:

https://forum.solidworks.com/message/264621#264621 

 

Not sure if you can read that or not. 

----
Autodesk Product Design Suite 2012 Premium
SolidWorks Premium 2011 SP4.0, Windows 7 Ultimate 64bit SP1
Gigabyte GA-Z68XP-UD5, Intel Core i7-2600k @ 4.66 GHz (103.5 X 45)
Corsair Vengeance 16GB (4 X 4GB) DDR3 1600
EVGA GeForce GTX 580 3072MB 384-bit GDDR5
Patriot Wildfire 120GB SSD, WD VelociRaptor 600GB 10k RPM HDD
Valued Mentor
coreyparks
Posts: 496
Registered: ‎06-07-2010
Message 5 of 13 (178 Views)

Re: sheet metal ??

12-15-2011 11:15 AM in reply to: drafter

Something like this?

Please mark this response "Accept as solution" if it answers your question.
-------------------------------------------------------------------------------------
Corey Parks
IV2014 Factory Design Suite Ultimate
Windows 7 64 bit
Synergis Adept document management software
16gb RAM --- Nvidia Quadro 4000 2gb
Contributor
drafter
Posts: 25
Registered: ‎07-13-2011
Message 6 of 13 (167 Views)

Re: sheet metal ??

12-15-2011 11:37 AM in reply to: dennymet

Yes I will be step bending

Member
dennymet
Posts: 5
Registered: ‎10-31-2011
Message 7 of 13 (156 Views)

Re: sheet metal ??

12-15-2011 12:01 PM in reply to: drafter

Inventor isn't going to dictate the bend locations for you persay... that's something you're going to have to provide to Inventor. If you want to model each and every bend, that's not difficult but time consuming. If you want to just have a model as a representation with a constant radius bend, that's simple.

 

Read that thread on the link I provided, the same situation applies to both software packages. 

----
Autodesk Product Design Suite 2012 Premium
SolidWorks Premium 2011 SP4.0, Windows 7 Ultimate 64bit SP1
Gigabyte GA-Z68XP-UD5, Intel Core i7-2600k @ 4.66 GHz (103.5 X 45)
Corsair Vengeance 16GB (4 X 4GB) DDR3 1600
EVGA GeForce GTX 580 3072MB 384-bit GDDR5
Patriot Wildfire 120GB SSD, WD VelociRaptor 600GB 10k RPM HDD
Valued Mentor
coreyparks
Posts: 496
Registered: ‎06-07-2010
Message 8 of 13 (153 Views)

Re: sheet metal ??

12-15-2011 12:03 PM in reply to: dennymet

So what I posted isn't what you're looking for?

Please mark this response "Accept as solution" if it answers your question.
-------------------------------------------------------------------------------------
Corey Parks
IV2014 Factory Design Suite Ultimate
Windows 7 64 bit
Synergis Adept document management software
16gb RAM --- Nvidia Quadro 4000 2gb
Contributor
drafter
Posts: 25
Registered: ‎07-13-2011
Message 9 of 13 (143 Views)

Re: sheet metal ??

12-15-2011 12:55 PM in reply to: coreyparks

yes this was the best solution for my application, I took your drawing and was able to modify it to fit my needs.  The only thing I was Inventor could do that I have not found that your are able to do is constrain an arc length.  I had to keep switching back and forth from the drawing which had the flat pattern to see how close I was in the length, then go back to the part and modify it then switch back so on and so forth.

Contributor
drafter
Posts: 25
Registered: ‎07-13-2011
Message 10 of 13 (141 Views)

Re: sheet metal ??

12-15-2011 12:59 PM in reply to: drafter

The only other question I have for this feature is if you can put a square hole in the middle of the part before you bend it.  Reason I ask is I know the dimensions of the hole that needs to be there, so I tried adding it, but it wont let me add it unless I am in the flat pattern, but I would like for it to generate the hole before it gets bent.

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.