Inventor General Discussion

Inventor General Discussion

Reply
Mentor
BarryZA
Posts: 199
Registered: ‎08-27-2012
Message 1 of 4 (419 Views)
Accepted Solution

Sheet metal fold puzzle

419 Views, 3 Replies
03-11-2013 01:49 AM

O.k, if anyone is in the mood for some mental gymnastics this morning:

 

 

 

sheet metal.jpg

 

The left-hand part was created by someone else, using the bend part command in the "modify" tab.

 

The right-hand part was created by me using fold in the sheet metal environment, using the same sketch.

 

Why, please why, is my part shorter?

 

Inv 2013

Bend Part command is not a sheet metal tool and doesn't take account Bend Allowance (sheet metal stretches when bent).

I wound not have used either method to create this part.

I am away from my Inventor computer so can't provide a demonstration on easy technique to model.

*Expert Elite*
JDMather
Posts: 28,253
Registered: ‎04-20-2006
Message 2 of 4 (379 Views)

Re: Sheet metal fold puzzle

03-11-2013 05:20 AM in reply to: BarryZA

Bend Part command is not a sheet metal tool and doesn't take account Bend Allowance (sheet metal stretches when bent).

I wound not have used either method to create this part.

I am away from my Inventor computer so can't provide a demonstration on easy technique to model.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2015 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
*Pro
sbixler
Posts: 1,968
Registered: ‎09-15-2003
Message 3 of 4 (375 Views)

Re: Sheet metal fold puzzle

03-11-2013 05:23 AM in reply to: BarryZA

The Bend tool sets the neutral axis of the material at the sketch plane, I believe, since Inventor knows nothing about the bending properties of the material; this makes the material deformation in this case all stretch and no compress.  The fold tool in Sheet Metal sets the neutral axis as directed by the active Sheet Metal Unfold Rule, by default at .44 times the thickness (or nearly halfway through the material).  So I expect that the sheet metal version would be more accurate.

 

Best practice, though, is to model sheet metal parts in the folded condition and let Inventor work out the flat pattern based on your k-factor or bend table for the specific material and forming tool.

Sam B
Inventor 2012 Certified Professional

Please click "Accept as Solution" if this response answers your question.
-------------------------------------------------------------------------------------
Inventor Professional 2013 SP1.1 Update 2
Windows 7 Enterprise 64-bit, SP1
HP EliteBook 8770w; 8 GB RAM; Core™ i7-3720QM 2.60 GHz; Quadro K4000M
SpaceExplorer/SpaceNavigator NB, driver 3.16.2
still waiting for a foreshortened radius dimensioning tool in Drawing Manager

Mentor
BarryZA
Posts: 199
Registered: ‎08-27-2012
Message 4 of 4 (374 Views)

Re: Sheet metal fold puzzle

03-11-2013 05:23 AM in reply to: JDMather

Thank's JD (as usual)

 

I was thinking K-factor had something to do with it. The sheet metal one is mine, the other one from the previous guy - for the record :smileywink:

 

I want to see if I can round off the decimals in the folded model and model it like you said sblixer. Nothing like being paid to fix someone else's mistakes. 

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.