Inventor General Discussion

Reply
Distinguished Contributor
mmiller1
Posts: 368
Registered: ‎12-03-2003
Message 1 of 6 (68 Views)

Sheet Metal Contour Flange

68 Views, 5 Replies
11-14-2002 12:09 AM
I have a "C" shaped sketch that I want to make a contour flange out of. It is the first and only feature
shown in the browser. I need to extrude this contour flange equally in both directions from the
sketching plane which is the X-Y plane at the origin. I can not find an option to do this. How can
I extrude this equally about the origin? I know I can insert a work plane but I (we) should not have
to do that. Does anyone know how to do this?

Thanks

Mike
*Maenpaa, Mike
Message 2 of 6 (68 Views)

Re: Sheet Metal Contour Flange

11-14-2002 12:10 AM in reply to: mmiller1
This was asked before. The answer was, to share the sketch and
extrude the opposite direction from the firtst extrusion.

Mike

 


style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
I
have a "C" shaped sketch that I want to make a contour flange out of. It is
the first and only feature
 shown in the browser. I need to extrude
this contour flange equally in both directions from the
sketching plane
which is the X-Y plane at the origin. I can not find an option to do this. How
can
I extrude this equally about the origin? I know I can insert a work
plane but I (we) should not have
to do that. Does anyone know how to do
this?

Thanks

Mike

*Autodesk\
Message 3 of 6 (68 Views)

Re: Sheet Metal Contour Flange

11-14-2002 12:38 AM in reply to: mmiller1
Click on the More button. You can specify either direction or
bi-directional.

Loren Jahraus
Autodesk Inventor Workflow Team

"mmiller" wrote in message
news:f123546.-1@WebX.maYIadrTaRb...
> I have a "C" shaped sketch that I want to make a contour flange out of. It
is the first and only feature
> shown in the browser. I need to extrude this contour flange equally in
both directions from the
> sketching plane which is the X-Y plane at the origin. I can not find an
option to do this. How can
> I extrude this equally about the origin? I know I can insert a work plane
but I (we) should not have
> to do that. Does anyone know how to do this?
> Thanks
>
> Mike
>
>
*Maenpaa, Mike
Message 4 of 6 (68 Views)

Re:

11-14-2002 12:59 AM in reply to: mmiller1
Oops! I should pay attention to what version I'm running. I was in 5.3.
Works great! However, I wanted to measure the flange I just created and got
a Blue Screen Of Death! :smileysad: Hopefully, SP1 will fix it tomorrow.
Mike

"Loren Jahraus (Autodesk)" wrote in message
news:smileyvery-happy:6C6483A6CE3564E19DBE55F9F7C8FDB@in.WebX.maYIadrTaRb...
> Click on the More button. You can specify either direction or
> bi-directional.
>
> Loren Jahraus
> Autodesk Inventor Workflow Team
>
> "mmiller" wrote in message
> news:f123546.-1@WebX.maYIadrTaRb...
> > I have a "C" shaped sketch that I want to make a contour flange out of.
It
> is the first and only feature
> > shown in the browser. I need to extrude this contour flange equally in
> both directions from the
> > sketching plane which is the X-Y plane at the origin. I can not find an
> option to do this. How can
> > I extrude this equally about the origin? I know I can insert a work
plane
> but I (we) should not have
> > to do that. Does anyone know how to do this?
> > Thanks
> >
> > Mike
> >
> >
>
>
*Caldwell, Larry
Message 5 of 6 (68 Views)

Re:

11-14-2002 01:22 AM in reply to: mmiller1
BSOD is almost always hardware related, least I don't know of a case that
couldn't be traced to hardware.
~Larry

"Mike Maenpaa" wrote in message
news:9ECB6742A80CB91DE3CE1E956B3706DC@in.WebX.maYIadrTaRb...
> Oops! I should pay attention to what version I'm running. I was in 5.3.
> Works great! However, I wanted to measure the flange I just created and
got
> a Blue Screen Of Death! :smileysad: Hopefully, SP1 will fix it tomorrow.
> Mike
>
> "Loren Jahraus (Autodesk)" wrote in message
> news:smileyvery-happy:6C6483A6CE3564E19DBE55F9F7C8FDB@in.WebX.maYIadrTaRb...
> > Click on the More button. You can specify either direction or
> > bi-directional.
> >
> > Loren Jahraus
> > Autodesk Inventor Workflow Team
> >
> > "mmiller" wrote in message
> > news:f123546.-1@WebX.maYIadrTaRb...
> > > I have a "C" shaped sketch that I want to make a contour flange out
of.
> It
> > is the first and only feature
> > > shown in the browser. I need to extrude this contour flange equally
in
> > both directions from the
> > > sketching plane which is the X-Y plane at the origin. I can not find
an
> > option to do this. How can
> > > I extrude this equally about the origin? I know I can insert a work
> plane
> > but I (we) should not have
> > > to do that. Does anyone know how to do this?
> > > Thanks
> > >
> > > Mike
> > >
> > >
> >
> >
>
>
*Maenpaa, Mike
Message 6 of 6 (68 Views)

Re:

11-14-2002 01:45 AM in reply to: mmiller1
That's what I was thinking too. I just changed my Hardware settings to
Conservative. We'll see if that helps!
Mike

> BSOD is almost always hardware related, least I don't know of a case that
> couldn't be traced to hardware.
> ~Larry
>
> "Mike Maenpaa" wrote in message
> news:9ECB6742A80CB91DE3CE1E956B3706DC@in.WebX.maYIadrTaRb...
> > Oops! I should pay attention to what version I'm running. I was in 5.3.
> > Works great! However, I wanted to measure the flange I just created and
> got
> > a Blue Screen Of Death! :smileysad: Hopefully, SP1 will fix it tomorrow.
> > Mike
> >
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.