Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
This may be a really basic question but I have just set up some drawing
templates and set the standard text size to 2.5mm. The symbols such as
feature control frame and the surface texture symbols are coming in with the
text size set at 3.5mm - I can't find where to change the text size or scale
of these symbols. Can somebody point me in the right direction?
Hello Phil,
Under format>>>standards
adjust "sheet text style" under the common tab
Hope this helps,
Kevin A. Robinson
"Phil Tumelty" wrote in message
news:656D70F7FABCC720C99466C19C3707E0@in.WebX.maYIadrTaRb...
> This may be a really basic question but I have just set up some drawing
> templates and set the standard text size to 2.5mm. The symbols such as
> feature control frame and the surface texture symbols are coming in with
the
> text size set at 3.5mm - I can't find where to change the text size or
scale
> of these symbols. Can somebody point me in the right direction?
>
> Thanks
> Phil Tumelty
>
>
"Kevin A Robinson (Autodesk)" wrote in
message news:EEEFC184EE32D1F6EA7F22F04FFB07F4@in.WebX.maYIadrTaRb...
> Hello Phil,
> Under format>>>standards
> adjust "sheet text style" under the common tab
> Hope this helps,
> Kevin A. Robinson
> "Phil Tumelty" wrote in
message
> news:656D70F7FABCC720C99466C19C3707E0@in.WebX.maYIadrTaRb...
> > This may be a really basic question but I have just set up some drawing
> > templates and set the standard text size to 2.5mm. The symbols such as
> > feature control frame and the surface texture symbols are coming in with
> the
> > text size set at 3.5mm - I can't find where to change the text size or
> scale
> > of these symbols. Can somebody point me in the right direction?
> >
> > Thanks
> > Phil Tumelty
> >
> >
>
>
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")