Inventor General Discussion

Inventor General Discussion

Reply
Valued Contributor
91 Posts
0 Kudos
Registered: ‎03-26-2011
Post 1 of 4
Accepted Solution

separate 1 part into multiple parts

1058 Views, 3 Replies
04-04-2012 07:22 AM

attached is a basic IV2012 part made as 1.....can i separate the 2 features and make 2 independant parts from the single part?

 

If yes can i then use these separate parts and place in assemblies?

 

Cheers

 

Terry

 

 

Hi Terry__Close, 

 

When you create the features as seperate solid bodies you can use the Make Components tool to derive out each solid body as part files and have them placed into an assembly. To find the make components tool go to the Manage tab.

 

I hope this helps.
Best of luck to you in all of your Inventor pursuits,
Curtis
http://inventortrenches.blogspot.com


Edit the Revolve feature and select the New Solid Option.

Then on the Manage tab select Make Components to push out to individual part files.

 

New Solid.png

*Expert Elite*
3,002 Posts
1,702 Kudos
Registered: ‎03-08-2006
Post 2 of 4

Re: separate 1 part into multiple parts

04-04-2012 07:29 AM in reply to: Terry__Close

Hi Terry__Close, 

 

When you create the features as seperate solid bodies you can use the Make Components tool to derive out each solid body as part files and have them placed into an assembly. To find the make components tool go to the Manage tab.

 

I hope this helps.
Best of luck to you in all of your Inventor pursuits,
Curtis
http://inventortrenches.blogspot.com




  solution.png  Did you find this reply helpful ? If so please use the Accept as Solution or  Kudos button below.





*Expert Elite*
28,609 Posts
2,122 Kudos
Registered: ‎04-20-2006
Post 3 of 4

Re: separate 1 part into multiple parts

04-04-2012 07:30 AM in reply to: Terry__Close

Edit the Revolve feature and select the New Solid Option.

Then on the Manage tab select Make Components to push out to individual part files.

 

New Solid.png

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2015 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Valued Contributor
91 Posts
0 Kudos
Registered: ‎03-26-2011
Post 4 of 4

Re: separate 1 part into multiple parts

04-04-2012 08:27 AM in reply to: JDMather

Thank you,

Terry

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post