Inventor General Discussion

Inventor General Discussion

Reply
Distinguished Contributor
SteveFrey
Posts: 525
Registered: ‎09-12-2007
Message 1 of 4 (210 Views)
Accepted Solution

Selecting Frame Generator Members In Browser vs. On Screen

210 Views, 3 Replies
11-29-2012 09:07 AM

I commonly need to select frame generator members to change visibility, etc. but since they are all contained in a single frame I need to do this in the browser.  This can be difficult because I need to zoom in on the screen while having the section of the browser visible on screen at the same time.  Is there a way that I can individually select each member in the assembly without using the browser?

Steve Frey
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot

Thanks.  When you say repeated dimensions are you referring to the top area where the grill bars are located?  I use a formula here (49.438) driven dimension then reference each space divided by the number required.

 

How would I use the equal constraint?  Highlight select and then hit =  I'll try it.  Thanks.

*Expert Elite*
JDMather
Posts: 27,462
Registered: ‎04-20-2006
Message 2 of 4 (208 Views)

Re: Selecting Frame Generator Members In Browser vs. On Screen

11-29-2012 09:18 AM in reply to: SteveFrey

Set your selection Filter to Part Priority.

 

Also - it looks to me like you have a lot of repeated dimensions - I prefer to use equal (=) constraints instead.

You can window or crossing window select and hit = on the keyboard.

 

Part Priority.png

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Distinguished Contributor
SteveFrey
Posts: 525
Registered: ‎09-12-2007
Message 3 of 4 (200 Views)

Re: Selecting Frame Generator Members In Browser vs. On Screen

11-29-2012 09:54 AM in reply to: JDMather

Thanks.  When you say repeated dimensions are you referring to the top area where the grill bars are located?  I use a formula here (49.438) driven dimension then reference each space divided by the number required.

 

How would I use the equal constraint?  Highlight select and then hit =  I'll try it.  Thanks.

Steve Frey
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
*Expert Elite*
JDMather
Posts: 27,462
Registered: ‎04-20-2006
Message 4 of 4 (196 Views)

Re: Selecting Frame Generator Members In Browser vs. On Screen

11-29-2012 10:17 AM in reply to: SteveFrey

I generally have zero dulpicated dimensions unless there is a chance that I know a couple of dimensions might need to be edited independently as the design changes.

 

You also have a bunch of 90° dimensions rather than Perpendicular constraints.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.