Inventor General Discussion

Reply
Mentor
j.vanderheijden
Posts: 237
Registered: ‎06-13-2011
Message 1 of 9 (381 Views)
Accepted Solution

Select Other

381 Views, 8 Replies
09-07-2011 11:09 AM

I work with inv 2012 and zoom with the Space Pilot of 3d Connexion.

If I zoom in or out and I come with my cursor over an object  the view of Select Other comes out  and I keep hanging in the zoom and I can not use more zoom in or out.

I have tried to deselect Select Other but I can not unless I uncheck the wrong button.

Do this under Application Options - General-Selection.

I wonder if this is the Space Pilot or Inventor.

Have the latest drivers installed.

Has anyone experience with this?.


Mvg Jos

Your drawings are only as good as the symbols that complete them...

After i instaled inv 2012 i instaled also a new mouse driver, this was an beta driver:http://www.3dconnexion.com/supported-software/3dxlabs/3dxlabsapp.html?tx_sugar3dxsoftware_pi1[app_id]=bd708299-9e93-2561-3908-4d9d89cc6177

Now i instaled a new driver the problem is over.

This is a bug for 3d Connexion.

Employee
xxxr2050
Posts: 11
Registered: ‎05-23-2011
Message 2 of 9 (346 Views)

Re: Select Other

09-07-2011 11:08 PM in reply to: j.vanderheijden

Thank you for reporting this.

I’m tried times as you said, but I failed to reproduced it. Would you please give more information, such as snapshot or video, so that I can continue to investigate more on this problem?

Thanks!

Mentor
j.vanderheijden
Posts: 237
Registered: ‎06-13-2011
Message 3 of 9 (334 Views)

Re: Select Other

09-08-2011 12:24 AM in reply to: xxxr2050

I try to make a movie, i'll be back:smileyvery-happy:

Mvg Jos

Your drawings are only as good as the symbols that complete them...
*Expert Elite*
MariaManuela
Posts: 870
Registered: ‎12-04-2003
Message 4 of 9 (313 Views)

Re: Select Other

09-08-2011 10:02 AM in reply to: j.vanderheijden

Maybe you need SP1 - issues addressed in Select Other tool

http://usa.autodesk.com/adsk/servlet/ps/dl/item?siteID=123112&id=17534725&linkID=9242019

 

Maria Manuela Pinho
Application Specialist
Cadtech / Asidek - Autodesk Gold Partner
Autodesk Inventor Professional 2015 | Lenovo W520
*Expert Elite*
JDMather
Posts: 27,487
Registered: ‎04-20-2006
Message 5 of 9 (311 Views)

Re: Select Other

09-08-2011 10:05 AM in reply to: MariaManuela

Also click Calibrate on your 3DConnexion Control Panel.

 

I recommend you calibrate at the beginning of each day or when any problem with user interface occurs.

(particularly if you try to resize the browser and it responds very slowly)

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Mentor
j.vanderheijden
Posts: 237
Registered: ‎06-13-2011
Message 6 of 9 (296 Views)

Re: Select Other

09-08-2011 12:36 PM in reply to: xxxr2050

I have already installed SP1 and i did calibrate but that makes no difference.

I made a small movie and made a print screen.

Every time i go over an object white my cursor the zoom action white my space pilot stops.

Here is the link where you can down load the file Zoom where the movie and print screen is in.

http://www.4shared.com/folder/5sB3nZBY/_online.html

Mvg Jos

Your drawings are only as good as the symbols that complete them...
Mentor
j.vanderheijden
Posts: 237
Registered: ‎06-13-2011
Message 7 of 9 (244 Views)

Re: Select Other

09-24-2011 02:51 AM in reply to: xxxr2050

I was wondering if I can expect a solution very soon.:smileysad:

 

Mvg Jos

Your drawings are only as good as the symbols that complete them...
*Expert Elite*
blair
Posts: 4,217
Registered: ‎11-13-2006
Message 8 of 9 (225 Views)

Re: Select Other

09-25-2011 09:21 PM in reply to: j.vanderheijden

Try updating your mouse drivers.

Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below.

IV2015 SP1 PDSU / Sim Mech 2015 r1 /
Win7-64
EVGA X79 - Classified, iCore7 3930k 32Gb Quad-Channel
950Gb (2 x 500Gb Sata III SSD RAID0 Adaptec 6805E Controller)
Nvidia GTX-690 Classified - 340.52
SpacePilot Pro 3.17.7, 6.17., 4.11
Delta Tau Chi ΔΤΧ
Mentor
j.vanderheijden
Posts: 237
Registered: ‎06-13-2011
Message 9 of 9 (189 Views)

Re: Select Other

09-28-2011 10:19 AM in reply to: blair

After i instaled inv 2012 i instaled also a new mouse driver, this was an beta driver:http://www.3dconnexion.com/supported-software/3dxlabs/3dxlabsapp.html?tx_sugar3dxsoftware_pi1[app_id...

Now i instaled a new driver the problem is over.

This is a bug for 3d Connexion.

Mvg Jos

Your drawings are only as good as the symbols that complete them...
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.