Inventor General Discussion

Reply
New Member
Licharowicz
Posts: 1
Registered: ‎02-11-2007
Message 1 of 3 (407 Views)

section view - ribs

407 Views, 2 Replies
02-11-2007 11:13 AM
In Inventor pro 11 when sectioning a part through a rib hatching is applied to the rib in the section view. How can I edit out the hatching on the rib? Or tell inventor not to hatch the rib?
*Dennis Jeffrey
Message 2 of 3 (407 Views)

Re: section view - ribs

02-11-2007 12:25 PM in reply to: Licharowicz
Select the hatch in the view and RMB (right mouse button) - uncheck
Visibility.

Alternatively to remove all hatching from a view, Edit the view (RMB) go to
Display options, and uncheck Hatching.
--
Dennis Jeffrey, AICE, MICE
260-312-6188
Instructor/Author/Sr. App Engr.
Inventor 11 Professional SP2
HP Pavillion Zv5000 (Modified)
Geforce Go 440, Driver: .8185, 2GB RAM
XP Pro SP2, Windows Classic Theme
http://www.design-excellence.com
wrote in message news:5482856@discussion.autodesk.com...
In Inventor pro 11 when sectioning a part through a rib hatching is applied
to the rib in the section view. How can I edit out the hatching on the rib?
Or tell inventor not to hatch the rib?
*Expert Elite*
JDMather
Posts: 27,052
Registered: ‎04-20-2006
Message 3 of 3 (407 Views)

Re: section view - ribs

02-11-2007 01:51 PM in reply to: Licharowicz
>How can I edit out the hatching on the rib?
As indicated by Dennis you can RMB turn off the hatch. Then Project Geometry the edges and draw lines for the correct ANSI standard boundary. (You have to RMB Done after projecting the needed edges.) You can then re-apply your own hatch to the newly created boundary.
I saw a demonstration of the forthcoming SolidWorks 2008 do this correctly without all of the manual editing.
Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.