Community
Inventor Forum
Welcome to Autodesk’s Inventor Forums. Share your knowledge, ask questions, and explore popular Inventor topics.
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Section view in I6 sp1

2 REPLIES 2
Back to Inventor Category
Back to Topic Listing
Reply
Message 1 of 3
dhoerig
118 Views, 2 Replies
‎11-25-2002 10:44 PM
‎11-25-2002 10:44 PM

Section view in I6 sp1

I'm having problems with sectioning an assembly in Inventor version 6 sp1, which I believe worked correctly in version 5.3. I have a simple round part with twelve evenly spaced tapped holes (in a polar pattern) and twelve bolts. I define the section cut to start horizontally thru the bolt at 3 o'clock, to the center of the part, then at an angle that passes thru the bolt at 10 o'clock. At this point, every looks great. I then "show contents" in the base view, select all the bolts, and turn off "section" for these parts. The bolts at the 10 o'clock position and 11 o'clock position no longer appear in the section view! I expected the bolts to appear in the section view, just not sectioned. Can anyone else produce the same results? Am I doing something wrong? Any help would be greatly appreciated. Thanks
Report
0 Likes
Reply
2 REPLIES 2
Message 2 of 3
Anonymous
in reply to: dhoerig
‎11-25-2002 11:00 PM
‎11-25-2002 11:00 PM

I had the same problem and was told that  5.3
did sectioning wrong.  6 is how it should be. I don't know a work around
though.  Sorry

 

Kathy Johnson


style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
I'm
having problems with sectioning an assembly in Inventor version 6 sp1, which I
believe worked correctly in version 5.3. I have a simple round part with
twelve evenly spaced tapped holes (in a polar pattern) and twelve bolts. I
define the section cut to start horizontally thru the bolt at 3 o'clock, to
the center of the part, then at an angle that passes thru the bolt at 10
o'clock. At this point, every looks great. I then "show contents" in the base
view, select all the bolts, and turn off "section" for these parts. The bolts
at the 10 o'clock position and 11 o'clock position no longer appear in the
section view! I expected the bolts to appear in the section view, just not
sectioned. Can anyone else produce the same results? Am I doing something
wrong? Any help would be greatly appreciated. Thanks
Report
0 Likes
Reply
Message 3 of 3
Anonymous
in reply to: dhoerig
‎11-26-2002 05:25 AM
‎11-26-2002 05:25 AM

What you are seeing is not the correct or expected
behavior.  I have the issue logged internally.  This happens only
on aligned section views.  Thank you!

 

-Sanjay Jayabal

Autodesk, Inc.


style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
I'm
having problems with sectioning an assembly in Inventor version 6 sp1, which I
believe worked correctly in version 5.3. I have a simple round part with
twelve evenly spaced tapped holes (in a polar pattern) and twelve bolts. I
define the section cut to start horizontally thru the bolt at 3 o'clock, to
the center of the part, then at an angle that passes thru the bolt at 10
o'clock. At this point, every looks great. I then "show contents" in the base
view, select all the bolts, and turn off "section" for these parts. The bolts
at the 10 o'clock position and 11 o'clock position no longer appear in the
section view! I expected the bolts to appear in the section view, just not
sectioned. Can anyone else produce the same results? Am I doing something
wrong? Any help would be greatly appreciated. Thanks
Report
0 Likes
Reply
Reply

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report

Report a website issue