Inventor General Discussion

Inventor General Discussion

Reply
Contributor
rocky79
Posts: 18
Registered: ‎01-20-2007
Message 1 of 9 (988 Views)

Screws & Nuts Cad Drawing

988 Views, 8 Replies
01-28-2007 10:22 AM
Hello,
Where can i find cad drawing for screws and nuts? Does inventor have premade list? thanks
*Expert Elite*
JDMather
Posts: 26,928
Registered: ‎04-20-2006
Message 2 of 9 (988 Views)

Re: Screws & Nuts Cad Drawing

01-28-2007 10:49 AM in reply to: rocky79
F1 search on these topics
Content Center
Bolted Connection Generator
Design Accelerator
Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Contributor
rocky79
Posts: 18
Registered: ‎01-20-2007
Message 3 of 9 (988 Views)

Re: Screws & Nuts Cad Drawing

01-28-2007 12:15 PM in reply to: rocky79
I still couldn't get it to work. I don't see a screw library.Does anyone have a clear instructions on how to place screws?
*Russ Tanner
Message 4 of 9 (988 Views)

Re: Screws & Nuts Cad Drawing

01-28-2007 01:52 PM in reply to: rocky79
Did you install Content Center and the ADMS?

--
Russ

http://www.tannersacre.com
sourdo55 at yahoo.com
wrote in message news:5466466@discussion.autodesk.com...
I still couldn't get it to work. I don't see a screw library.Does anyone
have a clear instructions on how to place screws?
Contributor
rocky79
Posts: 18
Registered: ‎01-20-2007
Message 5 of 9 (988 Views)

Re: Screws & Nuts Cad Drawing

01-28-2007 03:55 PM in reply to: rocky79
I installed everything that comes with autodesk inventor it was one big file. How would i verify that i have it/ or can i install it separately
*Duncan Anderson
Message 6 of 9 (988 Views)

Re: Screws & Nuts Cad Drawing

01-29-2007 06:57 AM in reply to: rocky79
The Content Centre is accessible whilst in the Assembly environment. There are icons
in the tool palette and it is also available from the main menu - I can't remember
which heading.

But you might want to look into using downloaded iParts from
http://www.cbliss.com/inventor/Parts/index.htm


--
Duncan
"Humour ... is one man shouting gibberish in the face of authority, and proving by
fabricated insanity that nothing could be as mad as what passes for ordinary
living."
(Terence 'Spike' Milligan K.B.E., 1918-2002)
www.autodesk.co.uk/inventorjobs


wrote in message news:5466555@discussion.autodesk.com...
I installed everything that comes with autodesk inventor it was one big file. How
would i verify that i have it/ or can i install it separately
*Dennis Jeffrey
Message 7 of 9 (988 Views)

Re: Screws & Nuts Cad Drawing

01-29-2007 07:25 AM in reply to: rocky79
He will also need to add the CC libraries by going to Projects.......

--
Inventor AIP11 sp2
Dennis Jeffrey, AICE, MICE
Center for Design Excellence
http://www.design-excellence.com
260-312-6188
"Duncan Anderson"
wrote in message news:5467024@discussion.autodesk.com...
The Content Centre is accessible whilst in the Assembly environment. There
are icons
in the tool palette and it is also available from the main menu - I can't
remember
which heading.

But you might want to look into using downloaded iParts from
http://www.cbliss.com/inventor/Parts/index.htm


--
Duncan
"Humour ... is one man shouting gibberish in the face of authority, and
proving by
fabricated insanity that nothing could be as mad as what passes for ordinary
living."
(Terence 'Spike' Milligan K.B.E., 1918-2002)
www.autodesk.co.uk/inventorjobs


wrote in message news:5466555@discussion.autodesk.com...
I installed everything that comes with autodesk inventor it was one big
file. How
would i verify that i have it/ or can i install it separately
Contributor
rocky79
Posts: 18
Registered: ‎01-20-2007
Message 8 of 9 (988 Views)

Re: Screws & Nuts Cad Drawing

01-30-2007 09:58 AM in reply to: rocky79
I tried to create comoponents from content center but it asked me to log in to a server. What pass database and server i should connect to?
Thanks
*hdd
Message 9 of 9 (988 Views)

Re: Screws & Nuts Cad Drawing

01-30-2007 10:22 AM in reply to: rocky79
Click the check box to log in as a "Content Center Read Only User"..

wrote in message news:5468911@discussion.autodesk.com...
I tried to create comoponents from content center but it asked me to log in
to a server. What pass database and server i should connect to?
Thanks
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.