Inventor General Discussion

Inventor General Discussion

Reply
Mentor
pball
Posts: 238
Registered: ‎04-20-2012
Message 1 of 2 (387 Views)

Scale dimensions in IDW drawing

387 Views, 1 Replies
01-11-2013 10:12 AM

Simply put I'd like to take a set of ordinate dimensions and multiply all the values by 10. Is this possible, without overriding the values and making them static?

 

The reason I'm asking is because I'm making a flat layout sketch for pockets around a drum. So imagine taking a drum and rolling it out flat. In the direction along the drum I drew it as 1" = 1" and for the circumfrence direction I did 1" = 10° so I don't have sketch that is 13" x 360". So I need to scale the dimensions in 1 direction up by 10.

*Pro
sbixler
Posts: 1,885
Registered: ‎09-15-2003
Message 2 of 2 (367 Views)

Re: Scale dimensions in IDW drawing

01-11-2013 05:43 PM in reply to: pball

Quick answer is 'no'.  That said, I'm sure that a macro or iLogic rule could be written to make this happen for you.

Sam B
Inventor 2012 Certified Professional

Please click "Accept as Solution" if this response answers your question.
-------------------------------------------------------------------------------------
Inventor Professional 2013 SP1.1 Update 1
Windows XP Pro 32-bit, SP3
HP EliteBook 8730w; 4 GB RAM; Core™ 2 Duo T9400 2.53 GHz; Quadro FX2700M
SpaceExplorer/SpaceNavigator NB, driver 3.7.18
still waiting for a foreshortened radius dimensioning tool in Drawing Manager

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.