style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
"STEVEHAESELER" <I
href="mailto:steveh@greatcabinets.com">steveh@greatcabinets.com> wrote
in message
href="news:f1237fb.-1@WebX.maYIadrTaRb">news:f1237fb.-1@WebX.maYIadrTaRb...
have looked on the discussion groups and seen nothing concerning this problem.
IV5.3 never had this occurance that we knew of either.
Does anyone have a solution to this?
If I have an IAM or an IPN with 30+ part I invariably am going to have
library parts. Also I will have IPARTS as well.
All of my IPARTS and library parts are listed in a subdirectory under my
working directory. Why? Because that is the way it is and I have no control on
that.
If I do a rebuild to an assembly I get a screen stating the current IAM /
IPN needs to be updated along with the iparts (gaskets). See attached file
called savefile.bmp.
Now if you look at the attachment called projectscreen.bmp you'll see the
library directory is in red. This indicates that it is "read only" we really
need this to have "read / write" access.
Somehow the permissions are setup in IV6.0. I have network admin.
privlegdes and it should not be a problem. I have the network server shared
and have full access etc.
How can I change the "read only" to be "read / write"?
Sorry no place to add attachments.
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
"KJohnson" <kj@sensoft> wrote in
message
href="news:3D1AB1F45226A0CE95D1B230085DF87E@in.WebX.maYIadrTaRb">news:3D1AB1F45226A0CE95D1B230085......
All libraries are read only. You need to
redefine the path as something else other than a library.
Kathy Johnson
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
"STEVEHAESELER" <I
href="mailto:steveh@greatcabinets.com">steveh@greatcabinets.com>
wrote in message
href="news:f1237fb.-1@WebX.maYIadrTaRb">news:f1237fb.-1@WebX.maYIadrTaRb...
have looked on the discussion groups and seen nothing concerning this
problem. IV5.3 never had this occurance that we knew of either.
Does anyone have a solution to this?
If I have an IAM or an IPN with 30+ part I invariably am going to have
library parts. Also I will have IPARTS as well.
All of my IPARTS and library parts are listed in a subdirectory under my
working directory. Why? Because that is the way it is and I have no control
on that.
If I do a rebuild to an assembly I get a screen stating the current IAM /
IPN needs to be updated along with the iparts (gaskets). See attached file
called savefile.bmp.
Now if you look at the attachment called projectscreen.bmp you'll see the
library directory is in red. This indicates that it is "read only" we really
need this to have "read / write" access.
Somehow the permissions are setup in IV6.0. I have network admin.
privlegdes and it should not be a problem. I have the network server shared
and have full access etc.
How can I change the "read only" to be "read / write"?
Sorry no place to add
attachments.