Inventor General Discussion

Inventor General Discussion

Active Member
9 Posts
0 Kudos
Registered: ‎12-11-2002
Post 1 of 3

Routing wire / cable around v - groove sheaves and smooth rollers

621 Views, 2 Replies
04-13-2012 03:09 PM

I work in a wire manufacturing plant and wondered if the "Cable Harness" feature of Inventor 2012 is adaptable enough to define the wire diameter (Typically 1-2 mm) and select the root groove of pulleys / sheaves as the wire's path.


My first attempt ended up with a wire touching a single tangent point around my guide pulley and the wire having a "natural" bend such that it bowed out of the real life path.  My wire is under tension in our process, so the path should be straight as the wire traverses around sheaves / rollers to reach its destination point. 



Inventor 2013 Professional SP1
Windows 7 Profession, 64-bit SP1
Intel Core i5 CPU, 8GB RAM
NVIDIA Quadro 600, 4800 MB
Product Support
1,257 Posts
259 Kudos
Registered: ‎11-22-2011
Post 2 of 3

Re: Routing wire / cable around v - groove sheaves and smooth rollers

04-23-2012 04:39 PM in reply to: tuiengr


The cable and harness is limited when it comes to creating a wire under tension. I don't think you'll be able to get the wire as straight as you like it. I'd suggest creating an adaptive 3D sketch to create the sweep path for a wire. Work Features added to a sheaves/rollers could be used to help create the path and make it scaleable.



Nathan Chandler

*Expert Elite*
7,329 Posts
658 Kudos
Registered: ‎12-01-2004
Post 3 of 3

Re: Routing wire / cable around v - groove sheaves and smooth rollers

04-24-2012 07:20 AM in reply to: innovatenate

I would add at least 3 points to the wire run at each pulley and then "redefine"  (with offset set at the wire radius) those points to go around the pulley (at the 3 quadrants where the wire will touch) That "should" come fairly close to what you want.

But a sweep might be a better option if that doesn't work.

Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below.

2015 Product Design Suite Ultimate
Windows 7 64 bit
Core i7 4820k processor (OC'd to 4.4Ghz), Nvidia GTX 770, 16G RAM

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Are you interested in helping shape the future of the Autodesk Community? To participate in this brief usability study, please click here. Your time and input is greatly appreciated!