Inventor General Discussion

Inventor General Discussion

Reply
New Member
vance4c
Posts: 2
Registered: ‎01-14-2013
Message 1 of 4 (320 Views)

Rotated spline becomes unusable

320 Views, 3 Replies
01-14-2013 03:25 PM

I have a spline that runs through about 70 points to make the perfect line. But when I rotate the scketch the spline turned from green to black and is no longer recognised as a boundry. I then have to delete the black line and re-draw. What is going wrong? How do I keep the spline green and usable?

*Expert Elite*
JDMather
Posts: 27,034
Registered: ‎04-20-2006
Message 2 of 4 (310 Views)

Re: Rotated spline becomes unusable

01-14-2013 04:12 PM in reply to: vance4c

Why are you rotating the sketch?

Did you turn it into a Sketch Block first?

Can you attach the *.ipt file here?

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
New Member
vance4c
Posts: 2
Registered: ‎01-14-2013
Message 3 of 4 (256 Views)

Re: Rotated spline becomes unusable

01-28-2013 01:33 PM in reply to: vance4c

I am rotating the part because the part in the design rotates and I need measurments at every degree of rotation. So I rotate the sketch make my measuremets and then rotate again. 

 

No it is not a sketch block.

 

No I can not upload the ipt file it has sensitive design that I am not aloud to show.

*Expert Elite*
JDMather
Posts: 27,034
Registered: ‎04-20-2006
Message 4 of 4 (244 Views)

Re: Rotated spline becomes unusable

01-28-2013 03:12 PM in reply to: vance4c

Problem doesn't make sense to me without at least a picture, but my guess is that turning into a Sketch Block might solve the problem.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.