Inventor General Discussion

Inventor General Discussion

Reply
Active Contributor
brendeho
Posts: 33
Registered: ‎02-09-2012
Message 1 of 4 (484 Views)
Accepted Solution

Render shaded or Translucent object with painted "surfaces"

484 Views, 3 Replies
11-06-2012 08:52 AM

 

I have an interesting question here - How should I try to shaded render this syringe so that a plunger can be seen underneath the translucent body? I need to have the gradiations and labels of the millileters be plainly black.

 

OR

 

is there a way to keep those gradations black while rendering an illustration and have the plunger visible beneath the body?

 

The gradiations are cut into the body of the syringe in this model, and the surfaces of the gradiations are changed to black.

 

Have been adjusting the color styles - but perhaps I'm missing something. Making the material translucent just fades the gradiations on the syringe, I'd like.

 

Untitled.png

Valued Contributor
nannerdw
Posts: 95
Registered: ‎06-09-2008
Message 2 of 4 (450 Views)

Re: Render shaded or Translucent object with painted "surfaces"

11-06-2012 11:19 AM in reply to: brendeho

You'll probably have to create a multi-body part, and color the bodies individually. Try embossing the painted features instead of engraving them. Then use the Split command to separate the painted markings and cylinder into two separate solid bodies. For the Split Tool, use a cylindrical surface that is coincident with the outer diameter of the syringe.

 

Alternatively, you can extrude the painted markings between two closely-spaced cylindrical faces, instead of embossing, and create a new solid body with the extrusion.

-Using Autodesk Inventor Professional 2012
Active Contributor
brendeho
Posts: 33
Registered: ‎02-09-2012
Message 3 of 4 (438 Views)

Re: Render shaded or Translucent object with painted "surfaces"

11-06-2012 12:24 PM in reply to: nannerdw

I was considering a couple of those options - thanks for the feedback!

*Expert Elite*
JDMather
Posts: 26,585
Registered: ‎04-20-2006
Message 4 of 4 (430 Views)

Re: Render shaded or Translucent object with painted "surfaces"

11-06-2012 12:44 PM in reply to: brendeho

In a similar situation I Derived the part (today you could use Mult-body, but I think I would still prefer the Derive technique as the rest is a work-around, not really the part) as surface body.

 

Then Thicken/Offset the (text in this case) just a bit away from the body as surface, and thicken offset again to solid and set my color.  This tiny bit of distance seemed to take care of the render problem.

 

My part wasn't quite as transparent as yours

 

Stapler.png

 

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.