Inventor General Discussion

Inventor General Discussion

Reply
Member
andrew.cox
Posts: 3
Registered: ‎08-23-2011
Message 1 of 6 (433 Views)

Renaming sheets in a multi-sheet IDW....

433 Views, 5 Replies
10-04-2012 12:04 PM

Is there any easy way to have sheet name automatically pull the "description" iProperty from the part that is on the sheet?  It can be very handy in a multi-sheet drawing for each sheet to have a descripive name in the browser, but the only way to do this (that I know of) is to manually change it.

 

Thanks,

Andrew

*Expert Elite*
Curtis_Waguespack
Posts: 3,002
Registered: ‎03-08-2006
Message 2 of 6 (422 Views)

Re: Renaming sheets in a multi-sheet IDW....

10-04-2012 01:21 PM in reply to: andrew.cox

Hi andrew.cox,

 

Here's an iLogic rule to do this. Note that description might not write to the sheet name correctly if it has characters such as commas in it.

 

I hope this helps.
Best of luck to you in all of your Inventor pursuits,
Curtis
http://inventortrenches.blogspot.com

 

Dim oSheets As Sheets 
oSheets = ThisDoc.Document.sheets
Dim oSheet As Sheet
For Each oSheet In oSheets
	oSheet.activate
	Dim oDrawingView As DrawingView 
	oDrawingView = oSheet.DrawingViews(1)
	oModelName = oDrawingView.ReferencedDocumentDescriptor.ReferencedDocument.DisplayName
	oDesc = iProperties.Value(oModelName, "Project", "Description")
	oSheet.Name =  oDesc 
Next

 



  solution.png  Did you find this reply helpful ? If so please use the Accept as Solution or  Kudos button below.





Member
andrew.cox
Posts: 3
Registered: ‎08-23-2011
Message 3 of 6 (398 Views)

Re: Renaming sheets in a multi-sheet IDW....

10-05-2012 05:55 AM in reply to: Curtis_Waguespack

Hi Curtis,

 

Thanks for this info!  However, I have not even used iLogic, so I don't know what to do with this.  Any chance you could point me towards a good tutorial, or provide me instructions yourself?

 

Cheers,

Andrew

*Expert Elite*
Curtis_Waguespack
Posts: 3,002
Registered: ‎03-08-2006
Message 4 of 6 (381 Views)

Re: Renaming sheets in a multi-sheet IDW....

10-05-2012 08:38 AM in reply to: andrew.cox

Hi andrew.cox,

 

This should cover it:

http://inventortrenches.blogspot.com/2012/01/creating-basic-ilogic-rule-with-event.html

 

I hope this helps.
Best of luck to you in all of your Inventor pursuits,
Curtis
http://inventortrenches.blogspot.com



  solution.png  Did you find this reply helpful ? If so please use the Accept as Solution or  Kudos button below.





Member
andrew.cox
Posts: 3
Registered: ‎08-23-2011
Message 5 of 6 (366 Views)

Re: Renaming sheets in a multi-sheet IDW....

10-05-2012 12:30 PM in reply to: Curtis_Waguespack

Hi Curtis,

 

I'm having some trouble with the code you supplied.  When I enter in into the "rule", I get this error....

 

Picture - 06 -  Oct. 05, 2012.jpg

 

I cut-and-paste the code exactly as you had it in your previous post.  Any thoughts?

 

Andrew

*Expert Elite*
Curtis_Waguespack
Posts: 3,002
Registered: ‎03-08-2006
Message 6 of 6 (330 Views)

Re: Renaming sheets in a multi-sheet IDW....

10-08-2012 07:12 AM in reply to: andrew.cox

Hi andrew.cox,

 

Most likely there is an issue with a line wrap due to this forums formatting, or something like that. Attached is the rule in a text file, you can copy and paste from it.

 

If you see the same results post back.

 

I hope this helps.
Best of luck to you in all of your Inventor pursuits,
Curtis
http://inventortrenches.blogspot.com

 

 



  solution.png  Did you find this reply helpful ? If so please use the Accept as Solution or  Kudos button below.





Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.