Inventor General Discussion

Inventor General Discussion

Reply
Member
wiptheman
Posts: 4
Registered: ‎02-12-2012
Message 1 of 6 (892 Views)
Accepted Solution

Remove Yellow Sketch line when inserting an image - Autodesk Inventor

892 Views, 5 Replies
02-12-2012 10:40 AM

Hi All,

 

I have a basic problem but I can't seem to be able to get around it. I added an image to a sketch successfully but it cam with a yellow line around it (see attached) and I can't remove it. In the sketch properties I was able to change it's color to black to make less visible but it's still there.

 

Any clue as to how I can make it disappear ?

 

Thanks for your help.

 

Kev 

Use Decal command to attach the image to your model.

*Expert Elite*
JDMather
Posts: 27,048
Registered: ‎04-20-2006
Message 2 of 6 (884 Views)

Re: Remove Yellow Sketch line when inserting an image - Autodesk Inventor

02-12-2012 12:06 PM in reply to: wiptheman

Use Decal command to attach the image to your model.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Member
wiptheman
Posts: 4
Registered: ‎02-12-2012
Message 3 of 6 (876 Views)

Re: Remove Yellow Sketch line when inserting an image - Autodesk Inventor

02-12-2012 12:34 PM in reply to: JDMather

Thanks a lot JD this indeed solved the problem !

 

In case someone looks for the function it's here: Ribbon: Model tab Create panel Decal 

Contributor
p.chubbock
Posts: 24
Registered: ‎05-13-2009
Message 4 of 6 (714 Views)

Re: Remove Yellow Sketch line when inserting an image - Autodesk Inventor

08-17-2012 03:12 AM in reply to: wiptheman

Thanks for the extra info wiptheman!

Member
smcgregory
Posts: 4
Registered: ‎06-10-2014
Message 5 of 6 (148 Views)

Re: Remove Yellow Sketch line when inserting an image - Autodesk Inventor

06-10-2014 02:29 PM in reply to: p.chubbock

How do you remove the yellow sketchboxes. I drew a rectangle and extruded backwards and now there is a yellow sketchbox around the face that I used to extrude on. How do I remove this?

*Expert Elite*
JDMather
Posts: 27,048
Registered: ‎04-20-2006
Message 6 of 6 (141 Views)

Re: Remove Yellow Sketch line when inserting an image - Autodesk Inventor

06-10-2014 03:34 PM in reply to: smcgregory

Turn off the visibility of your sketch.

 

Attach your *.ipt file here if you can't figure it out.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.