Inventor General Discussion

Reply
Valued Contributor
rnewcomb
Posts: 89
Registered: ‎03-03-2004
Message 1 of 4 (146 Views)
Accepted Solution

Reference???

146 Views, 3 Replies
03-04-2014 08:08 AM

In Solid Works I believe there is a thing called Reference, where it gives you all the locations of the files that are in your assembly, Is there such a thing in Inventor?

Sure

 

Pic here shows file path where part is in directory

 

File Path.JPG

 

Or click on part in Bill and they highlight in window.

 

Find Part.JPG

 

Hope this helps.

*Pro
jletcher
Posts: 1,975
Registered: ‎05-18-2011
Message 2 of 4 (134 Views)

Re: Reference???

03-04-2014 08:46 AM in reply to: rnewcomb

You can use Bill of Materials in the assembly just add file path column..

 

Or you can use Design Assistants.


Please mark this response as "Accept as Solution" if it answers your question.

James Letcher
2012 Factory Design Suite ( will not load 2013)
What happen to my Inventor :-(
*Expert Elite*
JDMather
Posts: 27,458
Registered: ‎04-20-2006
Message 3 of 4 (127 Views)

Re: Reference???

03-04-2014 08:48 AM in reply to: jletcher

I don't think this really answers the question.

 

Can you post screen shot?

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
*Pro
jletcher
Posts: 1,975
Registered: ‎05-18-2011
Message 4 of 4 (101 Views)

Re: Reference???

03-04-2014 11:50 AM in reply to: JDMather

Sure

 

Pic here shows file path where part is in directory

 

File Path.JPG

 

Or click on part in Bill and they highlight in window.

 

Find Part.JPG

 

Hope this helps.


Please mark this response as "Accept as Solution" if it answers your question.

James Letcher
2012 Factory Design Suite ( will not load 2013)
What happen to my Inventor :-(
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.