Inventor General Discussion

Reply
Valued Contributor
Terry__Close
Posts: 91
Registered: ‎03-26-2011
Message 1 of 6 (278 Views)

rectangle pattern

278 Views, 5 Replies
12-07-2012 03:48 AM

Inventor 2013 part file attached.

 

I am trying to get the rectangle pattern to form 8 blades of the same shape and height across the barrel.A picture shows how the height is lost within the barrel..The only blade which is the same height is the 2 outside blades

Is the rectangle the right tool to produce the result?

 

Terry

*Expert Elite*
JDMather
Posts: 27,586
Registered: ‎04-20-2006
Message 2 of 6 (272 Views)

Re: rectangle pattern

12-07-2012 04:19 AM in reply to: Terry__Close

This same question has come up here several times in the past - is it a class assignment?

A search should turn up the solution.  As I recall there is a bit of a trick.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Valued Contributor
Terry__Close
Posts: 91
Registered: ‎03-26-2011
Message 3 of 6 (268 Views)

Re: rectangle pattern

12-07-2012 04:38 AM in reply to: Terry__Close

Thanks

No it is not a classroom assignment just something i want to learn to do.

Valued Contributor
Terry__Close
Posts: 91
Registered: ‎03-26-2011
Message 4 of 6 (214 Views)

Re: rectangle pattern

12-10-2012 06:02 AM in reply to: Terry__Close

JD,no luck with the search.Do you remeber the trick?

Valued Contributor
Terry__Close
Posts: 91
Registered: ‎03-26-2011
Message 5 of 6 (163 Views)

Re: rectangle pattern

12-11-2012 03:33 AM in reply to: Terry__Close

Would anyone know how to create this rectangle pattern please?

Valued Contributor
Terry__Close
Posts: 91
Registered: ‎03-26-2011
Message 6 of 6 (119 Views)

Re: rectangle pattern

12-12-2012 04:47 AM in reply to: Terry__Close

I have made some progress.Should the blades be equal distances between each other...sketch shows different distances even though the 2 outside blades are same

Terry

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.