Inventor General Discussion

Reply
*Yeandle, Laurence
Message 11 of 15 (42 Views)

Re:

04-24-2003 03:47 AM in reply to: *Dotson, Sean
Rams................or is that a load of Bull

--
Laurence,

Power is nothing without Control
---


"Sean Dotson" wrote in message
news:5CF3451A62390562405FBE4EFB85329E@in.WebX.maYIadrTaRb...
> Well Happy birthday Albert and John. Mine was in April as well. Seems to
> be a popular month...
> --
> Sean Dotson, PE
> http://www.sdotson.com
> Check the Inventor FAQ for most common questions
> www.sdotson.com/faq.html
> -----------------------------------------------------------------------
> "Albert Allen" wrote in message
> news:9F3A6360DA629F070A0FF9E9EC319363@in.WebX.maYIadrTaRb...
> > Do you mean you actually get your birthday off?
> >
> > I just had a birthday and after 23 years of working here I didn't get
mine
> > off!
> >
> >
> > >have to wait till Monday - home time over here and Birthday tomorrow.<
> >
> >
>
>
*home\
Message 12 of 15 (42 Views)

Re:

04-24-2003 04:22 AM in reply to: *Dotson, Sean
Double Bull - I'm year of the Ox as well

John Bilton (home)
*Caldwell, Larry
Message 13 of 15 (42 Views)

Re: r6/r7 display differences

04-24-2003 10:37 AM in reply to: *Dotson, Sean
Well I'm not sure I know what you mean, they look pretty much the same to me
I haven't noticed anything on my system, but I run with edge display off
unless I want to see bend lines in SM. I'm on 7b but if you want I could
turn edge display on and do a screen cap of the file if you want to post
it/send it. BTW, we gon'a go play some Snooker when you get that score
keeper ready? See, I could tell what it was right away.
~Larry

"Sean Dotson" wrote in message
news:A6FC1664942D21200CF5D90496C18312@in.WebX.maYIadrTaRb...
> see IVCF
>
> Same drivers, same settings, same everything..
>
> see the difference between r6 and r7..
>
> The further you zoom the worse the polygon-ization
>
> Any suggestions?
>
> --
> Sean Dotson, PE
> http://www.sdotson.com
> Check the Inventor FAQ for most common questions
> www.sdotson.com/faq.html
> -----------------------------------------------------------------------
>
>
*Dotson, Sean
Message 14 of 15 (42 Views)

Re:

04-24-2003 09:11 PM in reply to: *Dotson, Sean
Look at the white cylinders. See how in R7 they are much rougher than in
R6.

And it's a giant mobile abacus not a snooker score keeper...(jeeze)

--
Sean Dotson, PE
http://www.sdotson.com
Check the Inventor FAQ for most common questions
www.sdotson.com/faq.html
-----------------------------------------------------------------------
"Larry Caldwell" wrote in message
news:EFB6D97AF6F8BA5F57E7FF3FC522E276@in.WebX.maYIadrTaRb...
> Well I'm not sure I know what you mean, they look pretty much the same to
me
> I haven't noticed anything on my system, but I run with edge display off
> unless I want to see bend lines in SM. I'm on 7b but if you want I could
> turn edge display on and do a screen cap of the file if you want to post
> it/send it. BTW, we gon'a go play some Snooker when you get that score
> keeper ready? See, I could tell what it was right away.
> ~Larry
>
> "Sean Dotson" wrote in message
> news:A6FC1664942D21200CF5D90496C18312@in.WebX.maYIadrTaRb...
> > see IVCF
> >
> > Same drivers, same settings, same everything..
> >
> > see the difference between r6 and r7..
> >
> > The further you zoom the worse the polygon-ization
> >
> > Any suggestions?
> >
> > --
> > Sean Dotson, PE
> > http://www.sdotson.com
> > Check the Inventor FAQ for most common questions
> > www.sdotson.com/faq.html
> > -----------------------------------------------------------------------
> >
> >
>
>
*Caldwell, Larry
Message 15 of 15 (42 Views)

Re:

04-24-2003 09:54 PM in reply to: *Dotson, Sean
Ah ... I do see the difference now. Almost looks like wire-frame silhouettes
on the bottom s-cap but the anomaly doesn't seem to appear in the base
cylinders; only the cylinder(s) above the base. I couldn't make anything
look like that but I don't have R6 loaded so I only tried to match it in R7.

Ya' know my first thought was: Abacus ... my second thought was: Naaah.
Does it get a trailer hitch, maybe? Oh yeah, while I'm thinking about it,
any plans for a giant sheep counter system (two giant leather bags and one
rock for each sheep)?
~Larry


"Sean Dotson" wrote in message
news:B77E9FA9233A59ACAEA9264776A6F04F@in.WebX.maYIadrTaRb...
> Look at the white cylinders. See how in R7 they are much rougher than in
> R6.
>
> And it's a giant mobile abacus not a snooker score keeper...(jeeze)
>
> --
> Sean Dotson, PE
> http://www.sdotson.com
> Check the Inventor FAQ for most common questions
> www.sdotson.com/faq.html
> -----------------------------------------------------------------------
> "Larry Caldwell" wrote in message
> news:EFB6D97AF6F8BA5F57E7FF3FC522E276@in.WebX.maYIadrTaRb...
> > Well I'm not sure I know what you mean, they look pretty much the same
to
> me
> > I haven't noticed anything on my system, but I run with edge display off
> > unless I want to see bend lines in SM. I'm on 7b but if you want I
could
> > turn edge display on and do a screen cap of the file if you want to post
> > it/send it. BTW, we gon'a go play some Snooker when you get that score
> > keeper ready? See, I could tell what it was right away.
> > ~Larry
> >
> > "Sean Dotson" wrote in message
> > news:A6FC1664942D21200CF5D90496C18312@in.WebX.maYIadrTaRb...
> > > see IVCF
> > >
> > > Same drivers, same settings, same everything..
> > >
> > > see the difference between r6 and r7..
> > >
> > > The further you zoom the worse the polygon-ization
> > >
> > > Any suggestions?
> > >
> > > --
> > > Sean Dotson, PE
> > > http://www.sdotson.com
> > > Check the Inventor FAQ for most common questions
> > > www.sdotson.com/faq.html
> >
> -----------------------------------------------------------------------
> > >
> > >
> >
> >
>
>
Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.