R11 iAssemblies

[ian.solomon]

Can someone tell me whether the iAssemblies in R11 support the use of Custom iParts

[Anonymous]

No, but you can "vote" for Custom iAssemblies at the AUGI Inventor Wishlist:
http://forums.augi.com/showthread.php?t=36401

--
T. Ham
Mechanical Engineer
CDS Engineering BV

Dual Pentium XEON 2.2 Ghz
2 GB SDRAM
NVIDIA QUADRO4 700 XGL (Driver = 77.18)
18 GB SEAGATE SCSI Hard Disc
3Com Gigabit NIC

Windows 2000 Professional SP4
Autodesk Inventor Series 9 SP4
Autodesk Inventor Series 10 SP3a
--

[Anonymous]

Have they got to the official voting yet ?

Or are we still on the "I think that's great so it can have my support, but it would be better with an 'upper whopper dinger stopper
in blue plastic'." stage ?


--
Duncan
"Humour ... is one man shouting gibberish in the face of authority, and proving by fabricated insanity that nothing could be as mad
as what passes for ordinary living."
(Terence 'Spike' Milligan K.B.E., 1918-2002)
www.autodesk.co.uk/inventorjobs




"Teun Ham (IV9 SP4 / IV10 SP3a)" wrote in message
news:5139961@discussion.autodesk.com...
No, but you can "vote" for Custom iAssemblies at the AUGI Inventor Wishlist:
http://forums.augi.com/showthread.php?t=36401

--
T. Ham
Mechanical Engineer
CDS Engineering BV

Dual Pentium XEON 2.2 Ghz
2 GB SDRAM
NVIDIA QUADRO4 700 XGL (Driver = 77.18)
18 GB SEAGATE SCSI Hard Disc
3Com Gigabit NIC

Windows 2000 Professional SP4
Autodesk Inventor Series 9 SP4
Autodesk Inventor Series 10 SP3a
--

[Anonymous]

No, voting has not begun yet. There are 3 voting cycles per year. Not sure
when the first one begins.

--
Sean Dotson, PE
RND Automation & Engineering
www.RNDautomation.com
www.mcadforums.com



"Duncan Anderson" wrote in
message news:5140019@discussion.autodesk.com...
Have they got to the official voting yet ?

Or are we still on the "I think that's great so it can have my support, but
it would be better with an 'upper whopper dinger stopper
in blue plastic'." stage ?


--
Duncan
"Humour ... is one man shouting gibberish in the face of authority, and
proving by fabricated insanity that nothing could be as mad
as what passes for ordinary living."
(Terence 'Spike' Milligan K.B.E., 1918-2002)
www.autodesk.co.uk/inventorjobs




"Teun Ham (IV9 SP4 / IV10 SP3a)" nl> wrote in message
news:5139961@discussion.autodesk.com...
No, but you can "vote" for Custom iAssemblies at the AUGI Inventor Wishlist:
http://forums.augi.com/showthread.php?t=36401

--
T. Ham
Mechanical Engineer
CDS Engineering BV

Dual Pentium XEON 2.2 Ghz
2 GB SDRAM
NVIDIA QUADRO4 700 XGL (Driver = 77.18)
18 GB SEAGATE SCSI Hard Disc
3Com Gigabit NIC

Windows 2000 Professional SP4
Autodesk Inventor Series 9 SP4
Autodesk Inventor Series 10 SP3a
--

[Anonymous]

What are custom iParts? Isn't every iPart that's not a standard part a
custom iPart?

BTW Teun, you might want to update your graphics drivers for R11.

Jerry

"Teun Ham (IV9 SP4 / IV10 SP3a)" nl> schreef in bericht news:5139961@discussion.autodesk.com...
No, but you can "vote" for Custom iAssemblies at the AUGI Inventor Wishlist:
http://forums.augi.com/showthread.php?t=36401

--
T. Ham
Mechanical Engineer
CDS Engineering BV

Dual Pentium XEON 2.2 Ghz
2 GB SDRAM
NVIDIA QUADRO4 700 XGL (Driver = 77.18)
18 GB SEAGATE SCSI Hard Disc
3Com Gigabit NIC

Windows 2000 Professional SP4
Autodesk Inventor Series 9 SP4
Autodesk Inventor Series 10 SP3a
--

[Anonymous]

couldn't agree more! custom iparts are even more irrelevant now that you can create a new member in the ipart factory when you insert the ipart into an assembly.

[Anonymous]

IV11 is sitting on my desk, I am not going to install IV11 untill I know
when Cyco Meridian will support IV11 (which could take some time).

But I will update my graphics driver before installing IV11, don't worry!

--
T. Ham
Mechanical Engineer
CDS Engineering BV

Dual Pentium XEON 2.2 Ghz
2 GB SDRAM
NVIDIA QUADRO4 700 XGL (Driver = 77.18)
18 GB SEAGATE SCSI Hard Disc
3Com Gigabit NIC

Windows 2000 Professional SP4
Autodesk Inventor Series 9 SP4
Autodesk Inventor Series 10 SP3a
--

[Anonymous]

So far I've counted 64 wishes - just over two years worth.


--
Duncan
"Humour ... is one man shouting gibberish in the face of authority, and proving by fabricated insanity that nothing could be as mad
as what passes for ordinary living."
(Terence 'Spike' Milligan K.B.E., 1918-2002)
www.autodesk.co.uk/inventorjobs



"Sean Dotson" wrote in message news:5140069@discussion.autodesk.com...
No, voting has not begun yet. There are 3 voting cycles per year. Not sure
when the first one begins.

--
Sean Dotson, PE
RND Automation & Engineering
www.RNDautomation.com
www.mcadforums.com



"Duncan Anderson" wrote in
message news:5140019@discussion.autodesk.com...
Have they got to the official voting yet ?

Or are we still on the "I think that's great so it can have my support, but
it would be better with an 'upper whopper dinger stopper
in blue plastic'." stage ?


--
Duncan
"Humour ... is one man shouting gibberish in the face of authority, and
proving by fabricated insanity that nothing could be as mad
as what passes for ordinary living."
(Terence 'Spike' Milligan K.B.E., 1918-2002)
www.autodesk.co.uk/inventorjobs




"Teun Ham (IV9 SP4 / IV10 SP3a)" nl> wrote in message
news:5139961@discussion.autodesk.com...
No, but you can "vote" for Custom iAssemblies at the AUGI Inventor Wishlist:
http://forums.augi.com/showthread.php?t=36401

--
T. Ham
Mechanical Engineer
CDS Engineering BV

Dual Pentium XEON 2.2 Ghz
2 GB SDRAM
NVIDIA QUADRO4 700 XGL (Driver = 77.18)
18 GB SEAGATE SCSI Hard Disc
3Com Gigabit NIC

Windows 2000 Professional SP4
Autodesk Inventor Series 9 SP4
Autodesk Inventor Series 10 SP3a
--

[Anonymous]

🙂

I think Autodesk has got enough wishes for the next 3 releases of
Inventor...perhaps we should close the entire AUGI Inventor Wishlist?

:-)

--
T. Ham
Mechanical Engineer
CDS Engineering BV

Dual Pentium XEON 2.2 Ghz
2 GB SDRAM
NVIDIA QUADRO4 700 XGL (Driver = 77.18)
18 GB SEAGATE SCSI Hard Disc
3Com Gigabit NIC

Windows 2000 Professional SP4
Autodesk Inventor Series 9 SP4
Autodesk Inventor Series 10 SP3a
--

[Anonymous]

What we don't know is how many of the wishes are already within ADSK's plans. Out of the first top ten, six might already be in the
pipeline.

Also, it would be nice if ADSK staffers visited the site, as some of the wishes might fit-in easily with something they're currently
working on.

No doubt over time and once it's settled down we'll see the fruits of our labours. For now I've got to search this N/G for all the
wishes I've submitted and re-do them via AUGI.



--
Duncan
"Humour ... is one man shouting gibberish in the face of authority, and proving by fabricated insanity that nothing could be as mad
as what passes for ordinary living."
(Terence 'Spike' Milligan K.B.E., 1918-2002)
www.autodesk.co.uk/inventorjobs




"Teun Ham (IV9 SP4 / IV10 SP3a)" wrote in message
news:5140169@discussion.autodesk.com...
:-)

I think Autodesk has got enough wishes for the next 3 releases of
Inventor...perhaps we should close the entire AUGI Inventor Wishlist?

:-)

--
T. Ham
Mechanical Engineer
CDS Engineering BV

Dual Pentium XEON 2.2 Ghz
2 GB SDRAM
NVIDIA QUADRO4 700 XGL (Driver = 77.18)
18 GB SEAGATE SCSI Hard Disc
3Com Gigabit NIC

Windows 2000 Professional SP4
Autodesk Inventor Series 9 SP4
Autodesk Inventor Series 10 SP3a
--

[Anonymous]

I'm quite happy for the moment - my #1 wish which I logged during R8 was the ability to display workplanes in a different colour
when viewed from the negative z-direction.

Only waited 3 releases, but now I'm happy bunny...

John Bilton
--
"It seemed like a good idea at the time..."

[Anonymous]

Do you think Cyco will ever support iAssemblies, or the Content Center, or
Frame Generator, or Design Accelerator (or Inventor Pro for that matter?)

Jerry

"Teun Ham (IV9 SP4 / IV10 SP3a)" nl> schreef in bericht news:5140134@discussion.autodesk.com...
IV11 is sitting on my desk, I am not going to install IV11 untill I know
when Cyco Meridian will support IV11 (which could take some time).

But I will update my graphics driver before installing IV11, don't worry!

--
T. Ham
Mechanical Engineer
CDS Engineering BV

Dual Pentium XEON 2.2 Ghz
2 GB SDRAM
NVIDIA QUADRO4 700 XGL (Driver = 77.18)
18 GB SEAGATE SCSI Hard Disc
3Com Gigabit NIC

Windows 2000 Professional SP4
Autodesk Inventor Series 9 SP4
Autodesk Inventor Series 10 SP3a
--

[ian.solomon]

A normal iPart is a completely table driven part.

a custom iPart is a table driven part with as many custom fields as required.

if there are 10 different fields, each that can have a infinitely variable user input, it would be virtually impossible to have every iteration in the table.

[Anonymous]

Not sure if you've tried this yet or not but when you insert a ipart if you go to the tab that says "table" there's a "new" option added. This allows you to generate members in the factory without opening it. Not sure if this helps you or not but it is a nice feature.

[samantos]

Hi all,

AUGI is planning to initiate the first voting cycle around June.

Thanks,
-Sam

[Anonymous]

So if I'm a really good boy I might get a birthday surprise (^__^)


--
Duncan
"Humour ... is one man shouting gibberish in the face of authority, and proving by fabricated insanity that nothing could be as mad
as what passes for ordinary living."
(Terence 'Spike' Milligan K.B.E., 1918-2002)
www.autodesk.co.uk/inventorjobs



wrote in message news:5141438@discussion.autodesk.com...
Hi all,

AUGI is planning to initiate the first voting cycle around June.

Thanks,
-Sam

[Anonymous]

Yes, I think they will...

--
T. Ham
Mechanical Engineer
CDS Engineering BV

Dual Pentium XEON 2.2 Ghz
2 GB SDRAM
NVIDIA QUADRO4 700 XGL (Driver = 77.18)
18 GB SEAGATE SCSI Hard Disc
3Com Gigabit NIC

Windows 2000 Professional SP4
Autodesk Inventor Series 9 SP4
Autodesk Inventor Series 10 SP3a
--