Inventor General Discussion

Inventor General Discussion

Reply
Active Member
Palchesko
Posts: 8
Registered: ‎11-12-2012
Message 1 of 14 (296 Views)

Question about making a large array of really small circles HELP!

296 Views, 13 Replies
11-12-2012 05:50 AM

I mainly use this program to design photomasks for photolithography.  I am trying to create a 0.5cm X 0.5cm area of 10 micron circles that are 20 microns apart.  A graduate student in my lab showed me how to make patterns by using the rectangular pattern button after drawing one circle.  I did that, and had it do the 30 micron spacing and 250 circles in each the horizontal and vertical direction.. However, this results in the program freezing every single time I try to do it and even if it didn't freeze it would take days to finish because that is about 27,500 circles total.  I have seen other people do similar things and have heard that is should be relatively easy. I have tried searching online and found nothing.  So I am curious, is ther any "easy" or easier way to do this. Currently I have drawn one square and am using the rectangular patter to draw only in one direction at a time and draw about 166 each time.  This hasn't made it freeze yet but is taking a while.

*Expert Elite*
Cadmanto
Posts: 3,244
Registered: ‎12-07-2011
Message 2 of 14 (292 Views)

Re: Question about making a large array of really small circles HELP!

11-12-2012 06:10 AM in reply to: Palchesko

Welcome to the forum.

First it would be helpful if you specify what version of Inventor you are running and what your system specs are. (i.e. memory, graphics card etc.)

Best Regards,
Scott McFadden
Inventor Professional 2013
(Colossians 3:23-25)

Active Member
Palchesko
Posts: 8
Registered: ‎11-12-2012
Message 3 of 14 (287 Views)

Re: Question about making a large array of really small circles HELP!

11-12-2012 06:31 AM in reply to: Palchesko

I have tried on two different computers.

1. A MAC that is running windows.  Has Autodesk Inventor Professional 2012 Student edition. The computer has 12.0 GB of RAM and an ATI Radeon HD 5750 graphics card.

 

2. A cyberpower PC that has Autodesk Inventor Professional 2013 student edition. The computer has 32.0GB of RAM and an AMD Radeon HD 7900 graphics card.

 

One thing I did just notice as I was doing the line by line method, was that it told me at one point that the memory for the undo function had reached it's maximum and did I want to increase it.  Do you think that could be causing the rectangular pattern function to freeze?

 

Thank you for your help! If you need more info about the computers please let me know. This is my first real attempt to use AutoDesk so I am a little unfamiliar with what is important.

*Expert Elite*
Cadmanto
Posts: 3,244
Registered: ‎12-07-2011
Message 4 of 14 (274 Views)

Re: Question about making a large array of really small circles HELP!

11-12-2012 06:50 AM in reply to: Palchesko

Looks like your PC's are plenty powerful enough to handle the job.

I am not sure what you mean by line to line, but one thing I have learned about the pattern feature it is

better to select axis and planes instead of geometry edges.  More stable.

Can you post some images of what you are doing and the messages you are seeing like the maxed out

undo?

Best Regards,
Scott McFadden
Inventor Professional 2013
(Colossians 3:23-25)

*Expert Elite*
JDMather
Posts: 26,605
Registered: ‎04-20-2006
Message 5 of 14 (268 Views)

Re: Question about making a large array of really small circles HELP!

11-12-2012 07:02 AM in reply to: Palchesko

For large patterns use AutoCAD rather than Inventor.

If needed - you could then bring the dwg solid over into Inventor for everything else.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Active Member
Palchesko
Posts: 8
Registered: ‎11-12-2012
Message 6 of 14 (264 Views)

Re: Question about making a large array of really small circles HELP!

11-12-2012 07:09 AM in reply to: Cadmanto

Sorry for the confusion.  As for the line by line-I am using the pattern feature to only reproduce the cirlces (or squares) in one direction as opposed to two directions at once.  So instead of trying to do the whole 166X166 features at one time. I am doing 1X166 at a time and that is working better.  The only error message I received was about the memory for the "undo" feature.  The rest of the times it just freezes and stops working.

 

It is in the middle of running something right now so I can't post images, but perhaps once it stops I can.

Active Member
Palchesko
Posts: 8
Registered: ‎11-12-2012
Message 7 of 14 (263 Views)

Re: Question about making a large array of really small circles HELP!

11-12-2012 07:09 AM in reply to: JDMather

Thanks for the response. I don't believe we have AutoCAD though :-(

Active Member
Palchesko
Posts: 8
Registered: ‎11-12-2012
Message 8 of 14 (254 Views)

Re: Question about making a large array of really small circles HELP!

11-12-2012 07:22 AM in reply to: Cadmanto

What do you mean by axis and planes rather than geometry? I only know how to select what I want to reproduce and pick a direction.  I did notice there was a button that says geometry in there that I can unclick but that is it.

 

*Expert Elite*
Cadmanto
Posts: 3,244
Registered: ‎12-07-2011
Message 9 of 14 (248 Views)

Re: Question about making a large array of really small circles HELP!

11-12-2012 07:31 AM in reply to: Palchesko

I am referring when it comes to the direction select an axis or plane.

I have experienced inconsistant results when selecting geometry edges.

Best Regards,
Scott McFadden
Inventor Professional 2013
(Colossians 3:23-25)

Active Member
Palchesko
Posts: 8
Registered: ‎11-12-2012
Message 10 of 14 (245 Views)

Re: Question about making a large array of really small circles HELP!

11-12-2012 07:32 AM in reply to: JDMather

I finally found that we have AutoCAD mechanical on the MAC that is running windows. But I have never used it so I am unsure of what to do.

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.