Inventor General Discussion

Inventor General Discussion

Reply
Member
sahury61
Posts: 5
Registered: ‎07-24-2012
Message 1 of 9 (640 Views)
Accepted Solution

Projected geometry in drawing sketch is not associate with the parent geometry

640 Views, 8 Replies
11-25-2012 10:10 PM

I have made a sketch associated with a view, and projected some geometry to my sketch. the sketch is grounded and constrained.Problem is, when I update my assembly file my view will be updated as well but the sketch does not update itself,and the reseon is the projected geomtry has not updated. I am fairly new with inventor but have read alot regaring my question but could not find any answer.Please help me:smileysad:

With the new show sketch in IDW's I would put that sketch in the model not the IDW. IDW has always had an issue with IDW sketch not updating. This started after the show sketch was put in.

Member
sahury61
Posts: 5
Registered: ‎07-24-2012
Message 2 of 9 (632 Views)

Re: Projected geometry in drawing sketch is not associate with the parent geomet

11-25-2012 10:52 PM in reply to: sahury61

to add to my previuos post, I am using inventor2013.

in attached files you can see my drawing befor and after updating the assembly file

 

*Pro
sbixler
Posts: 1,952
Registered: ‎09-15-2003
Message 3 of 9 (606 Views)

Re: Projected geometry in drawing sketch is not associate with the parent geomet

11-26-2012 04:13 AM in reply to: sahury61

Can you post the actual .idw (or .dwg) file?  Or at least post a screen shot of the view in Sketch edit mode with constraints shown so we can see the projected geometry and constriants.

*Pro
jletcher
Posts: 1,983
Registered: ‎05-18-2011
Message 4 of 9 (595 Views)

Re: Projected geometry in drawing sketch is not associate with the parent geomet

11-26-2012 04:46 AM in reply to: sahury61

With the new show sketch in IDW's I would put that sketch in the model not the IDW. IDW has always had an issue with IDW sketch not updating. This started after the show sketch was put in.


Please mark this response as "Accept as Solution" if it answers your question.

James Letcher
2012 Factory Design Suite ( will not load 2013)
What happen to my Inventor :-(
*Pro
sbixler
Posts: 1,952
Registered: ‎09-15-2003
Message 5 of 9 (591 Views)

Re: Projected geometry in drawing sketch is not associate with the parent geomet

11-26-2012 04:55 AM in reply to: jletcher

jletcher wrote:

IDW has always had an issue with IDW sketch not updating. This started after the show sketch was put in.



I've never had this problem that I can recall.  I wonder what specific circumstances lead to this happening?

*Pro
jletcher
Posts: 1,983
Registered: ‎05-18-2011
Message 6 of 9 (578 Views)

Re: Projected geometry in drawing sketch is not associate with the parent geomet

11-26-2012 05:29 AM in reply to: sbixler

Yeah does not happen all the time mostly on models with radius on the outside edges like his. Not sure why but started after IDW was made to show sketches. 


Please mark this response as "Accept as Solution" if it answers your question.

James Letcher
2012 Factory Design Suite ( will not load 2013)
What happen to my Inventor :-(
Member
sahury61
Posts: 5
Registered: ‎07-24-2012
Message 7 of 9 (552 Views)

Re: Projected geometry in drawing sketch is not associate with the parent geomet

11-26-2012 03:53 PM in reply to: sahury61

Thank you for your reply. I have attached some screen shots from my work.

I need to dimension different arc length on my rafter and also the cut bit at the tip of the rafter. As they are not actual edges, I have to project the geometry of the rafter and redraw some sketches on that and constraint it the projected geometry to be able to get my desired dimensions.

But as you see in the screen shot after I update my DIM ‘A’ in the assembly file, the view updates  perfectly but not the projected geometry. In the screen shot of the sketch after updating model  you see that the yellow lines of projected geometry which are not associate with the parent geometry.

If I am not clear again please let me know.

Many thanks,

Member
sahury61
Posts: 5
Registered: ‎07-24-2012
Message 8 of 9 (551 Views)

Re: Projected geometry in drawing sketch is not associate with the parent geomet

11-26-2012 03:55 PM in reply to: sahury61

please also see in attched file the sketch after updating the model.

Member
sahury61
Posts: 5
Registered: ‎07-24-2012
Message 9 of 9 (546 Views)

Re: Projected geometry in drawing sketch is not associate with the parent geomet

11-26-2012 05:20 PM in reply to: jletcher

Thank you James, I got it work with the sketch in the model. but as you said it happens with the projected geometry of on arc edges in IDW files.

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Are You Going To Be @ AU 2014? Feel free to drop by our AU topic post and share your plans, plug a class that you're teaching, or simply check out who else from the community might be in attendance. Ohh and don't forgot to stop by the Autodesk Help | Learn | Collaborate booths in the Exhibit Hall and meet our community team if you get a chance!